370363
4
Zoom out
Zoom in
Previous page
1/40
Next page
4
RQT7429
Front and surround speaker assembly
Simple setup
Front and surround speaker assembly
[Note]
The front and surround speaker pairs as well as the pipe pairs are
different.
Check the label on the rear of the speaker before attaching the
pipe ( page 8).
The pipe with the shorter cable is for the front speaker unit.
Preparation
To prevent damage or scratches, lay a soft cloth and perform
assembly on it.
For assembly, use a Phillips-head screwdriver.
1 Attach the pipe to the base.
1 Thread the speaker cable through the base.
2 Insert the pipe.
3 Secure the pipe to the
base.
Ensure the screw is
securely fastened.
2 Attach the stand to the front and
surround speaker.
There is no difference between the right and left speakers and stands.
Using the polyfoam included with this unit may be convenient.
1 Remove the screw and separate the mounting plate into
two parts.
2 Attach the plate A to the speaker.
Ensure the plate A is fastened on straight by lightly tightening the
top and bottom screws alternately until fully tightened.
You can also attach to the upper rear of the speaker.
The height of the speaker is indicated in the diagram
( page 5) when attaching the plate A to the upper rear or
lower rear of the speaker.
3 Place the pipe on the plate A and attach the plate B.
4 Secure the plate with the same screw removed in
procedure 1.
Make sure you have all the indicated components before starting the assembly, setup, and
connection.
4 pipes
4 large washer
screws
2 front and
2 surround
speaker units
8 small screws
4 bases
4 mounting plates
STEP1 [HT870]
The supplied stands are specially designed for attachment
to Panasonic SB-PF921 front speakers and SB-PS921
surround speakers. Only use as indicated in this setup.
Lessen excess speaker cable.
Thread the
speaker cable
through here.
Cable
Hole for screw
Groove
Insert the pipe while slightly
pulling on the speaker cable.
Rear side of base
Large
washer
screw
Cable
Plate A
Plate B
Small screw
Small screws
Speaker
Plate A
Polyfoam
Rotate the pipe so that the flat
side is facing away from the
back of the speaker.
Plate B
Fit the offset into the slot
and slide the plate B into
the locked position.
Offset
Slot
Plate B
Small screw
7429en-p03-30.fm 4 ページ 2004年3月5日 金曜日 午後11時27分
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic sc ht 870 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic sc ht 870 in the language / languages: English as an attachment in your email.

The manual is 3,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic sc ht 870

Panasonic sc ht 870 User Manual - German - 104 pages

Panasonic sc ht 870 User Manual - Dutch, Danish - 104 pages

Panasonic sc ht 870 User Manual - French, Italian - 104 pages

Panasonic sc ht 870 User Manual - Swedish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info