370470
27
Zoom out
Zoom in
Previous page
1/68
Next page
RECORDING
27
RQT7062
1 Press [PROG/CHECK].
2 Press [3, 4] to select “New Timer
Programme” and press [ENTER].
3 Press [1] to move through the items
and change the items with [3, 4].
The current settings are shown each time you press [1].
You may use the numbered buttons to enter the “Name”,
“Date”, “Start” and “Stop”.
Name (Programme position/TV Station Name)
Date
[. Current date
l;:
l Next day up to one month later minus one day
l;:
l Weekly timer: SUN-SAT>MON-SAT>MON-FRI
l;:
{. Daily timer: SUN>--->SAT
Start (Start time)/Stop (Finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
Mode (Recording mode page 25)
XP!#SP!#LP!#EP!#FR
^"""""""""""""""""J
PDC ( right)
ON!)OFF (– – –)
Title (page 40)
Select “Title” using [2, 1] and press [ENTER].
4 Press [ENTER] when you have
finished programming the timer.
Repeat steps 2–4 to programme other recordings.
5 Press [PROG/CHECK].
The timer recording list disappears.
6 Press [F TIMER].
The unit turns off output picture and sound from all terminals
(e.g. Scart AV and RF out terminals) and F” lights on the
unit’s display to indicate timer recording standby has been
activated.
Manually programming timer
recordings
RETURN
SELECT
SP
OK
20:0019:00BBC 1 15/ 7 TUE01
Mode
Disc
space
StopStartNo.
Name
Date
1:58 SP
TIMER
RECORDING
Remain
12:56:00 15.7. TUE
ENTER
New Timer Programme
OFF
PDC
Press ENTER to store
new programme.
1:58 SP
TIMER
RECORDING
Remain
12:57:00 15.7 . TUE
22:30
15/ 7 TUE
Mode
StopStart
Name
Date
SP
BBC 1
22:00
PDC
OFF
Title
Mode
Disc
space
StopStartNo.
Name
Date
1:58 SP
TIMER
RECORDING
Remain
12:58:00 15.7. TUE
New Timer Programme
PDC
SP
OK
20:0019:00BBC 1 15/ 7 TUE01
OFF
SP
OK
22:3022:00BBC 1 15/ 7 TUE02
OFF
Displayed if the recording
can fit in the remaining
space on the disc.
To release the unit from recording standby
If you want to record something else before the programme start
time, for example:
Press [F TIMER].
The unit turns on and F” goes out.
Be sure to press [F TIMER] before the programme start time to
put the unit on recording standby. Timer recording will work only
if “F” is displayed.
To cancel recording when recording has
already begun
Press [F TIMER].
Recording stops.
[Note]
The built-in clock employs 24-hour system.
If the unit is not put in the timer recording standby mode at the
latest 10 minutes before the programmed timer recording
starting time, the “F” flashes on the unit display. In this case,
press [F TIMER] to put the unit in the timer recording standby
mode.
Fflashes when the unit cannot go to timer recording standby
(e.g., a disc isn’t loaded, a disc that can’t be recorded to is
loaded, or the disc is protected). Check the disc carefully.
Even if the unit is put in the timer recording standby mode or the
timer recording is being performed, you can play a programme.
The actual time recorded may be longer than the programme
itself when television programmes are recorded using VIDEO
Plus+.
“PROG FULLis displayed if there are already 16 programmes.
The remaining time displayed is based on the current recording
mode.
When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programmes (a few seconds when
recording with DVD-RAM and approximately 30 seconds when
recording with DVD-R).
Setting for control of the recording starting
and ending time by special signal included in
the broadcasting signal (PDC Function)
PDC stands for Programme Delivery Control.
If a TV programme, for example a football game runs longer than
scheduled, is shortened or starts earlier or later, this function
synchronizes the recording start and stop with the actual
broadcasting start and stop of the TV programme.
Conditions for correct operation of the PDC function:
“ON” must be selected under “PDC” on the display.
The TV station must broadcast PDC signals.
The programme starting time must be set correctly to the
starting time listed in the newspaper/magazine.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic sc ht 1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic sc ht 1000 in the language / languages: English as an attachment in your email.

The manual is 5,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic sc ht 1000

Panasonic sc ht 1000 User Manual - English - 56 pages

Panasonic sc ht 1000 User Manual - German - 176 pages

Panasonic sc ht 1000 User Manual - Dutch - 58 pages

Panasonic sc ht 1000 User Manual - Danish - 24 pages

Panasonic sc ht 1000 User Manual - French - 56 pages

Panasonic sc ht 1000 User Manual - French - 56 pages

Panasonic sc ht 1000 User Manual - French, Italian - 176 pages

Panasonic sc ht 1000 User Manual - Swedish - 58 pages

Panasonic sc ht 1000 User Manual - Spanish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info