160644
22
Zoom out
Zoom in
Previous page
1/32
Next page
RQT9383
22
Connecting to network
Backing up recording data in HDD to the
computer
We recommend backing up recording data on HDD to the
computer or NAS (Network Attached Storage) periodically.
The recording data at the time of backing up can be restored
even if the recording data is lost due to this unit’s malfunction.
For backup, we recommend 100BASE-T wired LAN network
connection with fast transmission speed.
Preparation
1. Connect this unit and computer to the network (
page 19)
or connect this unit directly to the computer (
page 20).
2. Press [
q
/
h
HDD]
[
g
] (stop) to switch the selector.
PC operation
1. Create a folder called “hcbackup” to set the shared
folder (
page 20).
This unit operation
2-1. Press [SETUP].
2-2. Select “Back Up/Restore HDD” on the “Maintain” tab
and con rm.
2-3. Select “Back Up HDD” to con rm.
3. Select “PC Name” to con rm.
4. Enter the PC name of backup destination to con rm.
Enter the PC name con rmed on page 20. (English
character, number and symbol up to 15 characters. Not
case-sensitive.)
5.
Repeat steps 3 to 4 to enter other items.
User Name: User account’s user name registered for Windows
Vista
®
or Windows XP
Password: Password set for the user name
6.
Select “Start Backup” to con rm.
Suspending backup operation
Press [
8
] during backup.
Select “Yes” to confirm.
Resuming backup operation
After the backup is suspended, turn this unit on again and
select “Yes” to confirm.
When backup operation is stopped due to the
PC’s abnormal termination
Press [
8
].
Press [
8
] again to turn the unit on and restart
backup.
Note
The backup data is encrypted to be recorded. Therefore, the
backup data cannot be played on the computer or copied to other
devices for use. Also, the backup data can be restored only on the
original device used for backup.
The size of data backed up to the computer is slightly larger than
the actual recording data.
You cannot use suspended backup data for restoration. Finish
backup operation as soon as possible to validate the backup data.
Power-save Mode is adopted for Power Off Mode setting until
backup operation is complete.
When backup starts, the timer setting is disabled. Set the timer
again to use it.
In the second and subsequent back up operations, only changed/
added recording data since the last operation will be backed up
(difference backup).
Restoring backup data
When restoring the data, the HDD is reset to the
default setting at the time of purchase (No recording
data exists.) This means the HDD status returns to the
status at the time of purchase when restoring fails. Be
extremely careful when restoring the backup data.
Preparation
1. Connect this unit and computer to the network (
page 19)
or connect this unit directly to the computer (
page 20).
2. Press [
q
/
h
HDD]
[
g
] (stop) to switch the selector.
This unit operation
1-1. Press [SETUP].
1-2. Select “Back Up/Restore HDD” on the “Maintain” tab
and con rm.
1-3. Select “Restore HDD” to con rm.
2. Select “PC Name” to con rm.
3. Enter the PC name of backup destination to con rm.
Enter the PC name con rmed on page 20. (English
character, number and symbol up to 15 characters. Not
case-sensitive.)
4. Repeat steps 2 to 3 to enter other items.
User Name: User account’s user name registered for Windows
Vista
®
or Windows XP
Password: Password set for the user name
5. Select “Start Restoring” to con rm.
Cancelling restoring operation
Press [
8
].
Select “Yes” to con rm.
When the operation is cancelled, all operations processed
until cancelled are cleared and no recording data exists on
the HDD. Perform the restoring operation again.
Note
If the restored data is properly played back on this unit, the backup
data on the computer will be unnecessary.
Restoring operation may be stopped due to the PC’s abnormal
termination. In this case, perform the process again from the
beginning. However, if the backup data itself has a problem, the
data cannot be restored.
When restoring starts, the timer setting is disabled. Set the timer
again to use it.
Disclaimer
Observe the following for handling backup data.
Do not open the backup data with application software or
change the contents.
Do not compress the backup data.
Do not change the file name of backup data or move the
storage location.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic sc hc7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic sc hc7 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic sc hc7

Panasonic sc hc7 User Manual - German - 92 pages

Panasonic sc hc7 User Manual - Dutch, Danish - 124 pages

Panasonic sc hc7 User Manual - French, Italian - 92 pages

Panasonic sc hc7 User Manual - Swedish, Spanish - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info