734660
8
Zoom out
Zoom in
Previous page
1/28
Next page
8
TQBJ2174
Bluetooth
®
operations
You can listen to the sound from the Bluetooth
®
audio
device from this unit wirelessly.
Refer to the operating instructions of the Bluetooth
®
device for details.
Preparation
Turn on the Bluetooth
®
feature of the device and
place the device near this unit.
Pairing with Bluetooth
®
devices
1 Press [ ] to select “BLUETOOTH”.
If “PAIRING” is indicated on the display, go to step 3.
2 Press [PLAY MENU] to select “PAIRING” and then
press [OK].
Alternatively, press and hold [SELECTOR,
s
PAIRING]
on the unit.
3 Select “SC-HC412” or “SC-HC410” from the
Bluetooth
®
device’s Bluetooth
®
menu.
The MAC address (alpha-numerical string that is unique
to each set) may be displayed before “SC-HC412” or
“SC-HC410” is displayed.
The name of the connected device is indicated on the
display for a few seconds.
4 Start playback on the Bluetooth
®
device.
Connecting a paired Bluetooth
®
device
1 Press [ ] to select “BLUETOOTH”.
“READY” is indicated on the display.
2 Select “SC-HC412” or “SC-HC410” from the
Bluetooth
®
device’s Bluetooth
®
menu.
The name of the connected device is indicated on the
display for a few seconds.
3 Start playback on the Bluetooth
®
device.
If prompted for the passkey, input “0000”.
You can register up to 8 devices with this unit. If a 9th device
is paired, the device that has not been used the longest will
be replaced.
This unit can only be connected to one device at a time.
When “BLUETOOTH” is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth
®
device. (“LINKING” is indicated on the display
during this process.) If the connection attempt fails, try to
establish a connection again.
You can change the transmission mode to prioritise
transmission quality or sound quality.
Preparation
Press [ ] to select “BLUETOOTH”.
If a Bluetooth
®
device is already connected,
disconnect it.
1 Press [PLAY MENU] repeatedly to select
“LINK MODE”.
2 Press [2, 1] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
Select “MODE 1” if the sound is interrupted.
When enjoying video contents with this function, the video
and audio output may not be synchronised. In this case,
select “MODE 1”.
The factory default is “MODE 2”.
If the sound input level from the Bluetooth
®
device is
too low, change the input level setting.
Preparation
Connect a Bluetooth
®
device.
1 Press [PLAY MENU] repeatedly to select “INPUT
LEVEL”.
2 Press [2, 1] to select the level and then press
[OK].
“LEVEL 0” ,. “LEVEL i1” ,. “LEVEL i2”
^--------------------------------------------------J
Select “LEVEL 0” if the sound is distorted.
The factory default is “LEVEL 0”.
1 While a Bluetooth
®
device is connected:
Press [PLAY MENU] repeatedly to select
“DISCONNECT?”.
2 Press [2, 1] to select “OK? YES” and then press
[OK].
You can also disconnect the Bluetooth
®
device by pressing
and holding [SELECTOR, s PAIRING] on the unit.
The Bluetooth
®
device will be disconnected if a different
audio source (e.g., “CD”) is selected.
Connecting via Bluetooth
®
menu
Bluetooth
®
transmission mode
Bluetooth
®
input level
Disconnecting a Bluetooth
®
device
SC-HC410_412-EGEB~TQBJ2174.book 8 ページ 2018年11月9日 金曜日 午前9時41分
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HC410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HC410 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HC410

Panasonic SC-HC410 User Manual - German, Dutch, French, Italian - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info