735111
13
Zoom out
Zoom in
Previous page
1/24
Next page
13
RQT0A88
Sound adjustment
The following sound effects can be added to the audio
output.
1Press [SOUND] repeatedly to select the effect.
2Press [3,4] to select the setting and then press
[OK].
You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.
When “AUX” is selected as the source, you can select
“INPUT LEVEL” to adjust the sound input level of the
external device. (l5)
You can save your desired sound settings to
“SOUND 1”, “SOUND 2” or “SOUND 3” as
“MY SOUND”.
1Adjust your desired sound effects. (labove)
2Press [SETUP] to select “SAVE MY SOUND”.
3Press [3,4] to select a setting number and then
press [OK].
“SAVED” is displayed.
The sound settings previously saved will be replaced
when you save new settings to the same setting
number.
Recalling the sound settings you have
saved
1Press [SOUND] to select “MY SOUND”.
2Press [3,4] to select the desired sound setting
number and then press [OK].
Clock and Timer
This is a 24-hour clock.
1Press [SETUP] repeatedly to select “CLOCK”.
2Press [3,4] to set the time and then press [OK].
To display the clock, press [SETUP] repeatedly to select
“CLOCK” and then press [OK] once. The time is displayed for
10 seconds.
(During standby, press [DISPLAY] once.)
The clock is reset when there is a power failure or when the
AC mains lead is removed.
Reset the clock regularly to maintain accuracy.
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock.
1Press [SETUP] repeatedly to select “TIMER ADJ”.
2Press [3,4] to set the starting time (“ON TIME”)
and then press [OK].
3Press [3,4] to set the finishing time
(“OFF TIME”) and then press [OK].
4Press [3,4] to select the music source* and then
press [OK].
Turning the timer on
1Prepare the selected music source and set the
desired volume.
2Press [SETUP] repeatedly to select “TIMER SET”.
3Press [3,4] to select “SET” and then press [OK].
F” is displayed.
To turn the timer off, select “OFF”.
4Press [Í] to turn the unit to standby mode.
To display the timer settings, press [SETUP] repeatedly to
select “TIMER ADJ” and then press [OK] once.
The music source and volume will also be displayed if the
timer is turned on.
During standby, if the timer is turned on, press [DISPLAY]
twice to display the settings.
This unit can be used as normal after the timer is set,
however:
Turn the unit to standby mode before the timer start time.
Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
“MY SOUND”
(My sound)
“SOUND 1”, “SOUND 2” or
“SOUND 3”.
(lbelow, “Saving the sound
settings”)
“PRESET EQ”
(Preset Equalizer)
“HEAVY” (heavy), “SOFT” (soft),
“CLEAR” (clear), “VOCAL”
(vocal) or “FLAT” (flat/off).
The factory default is “HEAVY”.
“BASS” (Bass) or
“TREBLE” (Treble)
Adjust the level (j4 to i4).
“D.BASS”
(Dynamic Bass)
“ON D.BASS” or “OFF D.BASS”.
The factory default is
“ON D.BASS”.
“SURROUND”
(Surround)
“ON SURROUND” or
“OFF SURROUND”.
The factory default is
“OFF SURROUND”.
Saving the sound settings
Setting the clock
Play timer
* “CD”, “USB”, “DAB+” ([SC-HC397]), “FM” and “AUX” can be
set as the music source.
SC-HC397-395EGEBGN~RQT0A88-1B.book 13 ージ 207年月5 木日 前134分
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HC395 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HC395 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HC395

Panasonic SC-HC395 User Manual - German, French, Italian, Finnish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info