734662
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
TQBJ2071
External music device
You can play music from an external music device.
Preparation
Switch off the equaliser (if any) of the external music
device to prevent sound distortion.
Decrease the volume of the system before you connect
or disconnect the external music device.
1 Connect the external music device using an audio
cable (not supplied).
Plug type: Ø 3.5 mm stereo
2 Press [RADIO/AUX] to select “AUX”.
3 Play the external music device.
To adjust the input level
1 Press
[SOUND]
repeatedly to select
“INPUT LEVEL”
.
2 Press [R, T] to select “LOW” or “HIGH” and then
press [OK].
Note:
The default setting is “HIGH”.
Select “LOW” if the sound is distorted during “HIGH” input
level.
Read the operating instructions of the external music device
for details.
Components and cables are sold separately.
AUX IN auto play
The system will automatically switch to AUX source when
it detects the signal from an external music device.
This function also works in standby mode.
1 Press [SETUP] repeatedly to select
“AUX-IN AUTO PLAY”.
2 Press [R, T] to select “ON” and then press [OK].
To cancel, select “OFF”.
Note:
The default setting is “OFF”.
When the function is switched off and every time you switch
to AUX source, “AUX-IN AUTO PLAY IS OFF” will be shown
once.
This function does not work when the volume of the external
music device is low, increase its volume.
Stop or pause the external music device before you change
to other music source or to standby mode so as to prevent
the automatic switch to AUX source.
Others
Auto off
This system automatically switches off when you do not
use it for approximately 20 minutes.
1 Press [SETUP] repeatedly to select “AUTO OFF”.
2 Press [R, T] to select “ON” and then press [OK].
To cancel, select “OFF”.
Note:
This function does not work when you are in radio source or
when a Bluetooth
®
device is connected.
Bluetooth
®
standby
This function automatically switches on the system when
you establish a Bluetooth
®
connection from a paired
device.
1 Press [SETUP] repeatedly to select
“BLUETOOTH STANDBY”.
2 Press [R, T] to select “ON” and then press [OK].
To cancel, select “OFF”.
Charging a device
This system can supply power to a device, such as a
smartphone, connected to the USB port.
Note:
Use a cable compatible with the device.
Use the charger supplied with the device if power is not
supplied to the device.
Do not use a cable or connect a device that exceeds the
rated value of 5 V, 1.5 A.
Examine the screen of the device to check if charging is
complete. Disconnect the device after charging.
Once fully charged, remove the USB cable from the USB
port.
After the device has started charging, you can switch the
unit to standby mode.
When charging a depleted device, do not switch the unit
to standby mode until the device becomes operational.
Depending on the device, power may not be supplied to it.
Read the operating instructions of the device for details.
Software update
Occasionally, Panasonic may release updated software
for this unit that may add or improve the way a feature
operates. These updates are available free of charge.
For more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Checking the software version
1 Press [SETUP] repeatedly to select “SW VER.”
and then press [OK].
The software version is shown.
2 Press [OK] again to exit.
Audio cable
(not supplied)
SC-HC302.300 EB.EG TQBJ2071 En.fm Page 12 Monday, January 8, 2018 11:27 AM
12


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-sc-hc302

Reset search

  • I have connected my iPad to my sc-hc302 by Bluetooth, both show a connection but will not play. When I first got it it paired ok and played ok but has now will not play. I have tried everything any ideas Submitted on 3-3-2022 at 11:53

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HC302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HC302 in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HC302

Panasonic SC-HC302 User Manual - German, Dutch, French, Italian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info