612821
14
Zoom out
Zoom in
Previous page
1/16
Next page
RQTX1057
14
Troubleshooting guide (continued)
g DAB
DAB reception is poor
Keep the antenna away from computers, televisions, other
cables and cords.
Use an outdoor antenna ( page 4).
“DATA”
Data broadcast being received over the DAB broadcast
signal, cannot be used on this unit.
“SCRAMBLED”
The broadcast station being received cannot be accessed.
“NO SERVICE”
The station is currently not broadcasting.
“NO SIGNAL”
This station cannot be received. Check your antenna
( page 4).
“SCAN FAILED”
Stations are not receivable. Check your antenna and try Auto
scanning ( page 4, 9, 10).
“STATION FULL”
DAB station memory is full. Use the following method to clear
station memory.
Press [DAB MENU].
Press [e,r] to select “STATION CLEAR”.
Press [OK]. “OK? Push OK” is displayed.
Press [OK].
Station memory is erased and the unit automatically begins
Auto scanning.
g iPod/iPhone
iPod/iPhone does not turn on
Verify that the iPod/iPhone battery is not depleted before
connecting it to the unit.
Before inserting the iPod/iPhone into the dock, turn both the
unit and the iPod/iPhone off. Turn the power on and select
the appropriate source.
No sound is heard from the speakers
The iPod/iPhone is not inserted correctly into the dock. Turn
the iPod/iPhone off and remove it from the dock connector.
Reinsert it and turn it on again.
Make sure that the iPod/iPhone is actually playing something.
Adjust the volume.
Distorted sound or the sound level is too low
Make sure the equalizer function of the iPod/iPhone is turned
off.
iPod/iPhone cannot be controlled by the remote control or
main unit
Make sure the iPod/iPhone is inserted properly into the dock.
Check the dock connection and make sure that iPod/iPhone
is selected as the source of music (page 12).
iPod/iPhone does not charge
Check all connections (page 4, 12).
Maintenance
g Pull out the power plug from the outlet for maintenance
beforehand and then wipe it using a soft and dried cloth.
When dirt is heavy, wring the cloth moistened in water tightly
to wipe the dirt, and then wipe it with a dried cloth.
Do not use solvents such as benzine, thinner, alcohol and
detergent, which may deform the coating of the outer case.
When using a chemical cloth, follow the precautions.
g Care on the CD lens
Clean the lens regularly to prevent malfunctions. Use a
blower to remove dust and a cotton swab if it is extremely
dirty.
Do not use the lens cleaner of the CD type.
When the following situations occur, reset the memory:
There is no response when buttons are pressed.
You want to clear and reset the memory contents.
To reset memory
Disconnect the AC mains lead. (Wait for at least 3 minutes before proceeding to step 2.)
While pressing and holding down [8] on the main unit, reconnect the AC mains lead.
“--------” appears on the display.
Release [8].
All the settings are returned to the factory preset. You will need to reset the memory items.
Memory reset (Initialization)
RQTX1057-3B (DBEB) 16.08.10.indd 14 8/16/2010 12:04:37 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HC20DBEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HC20DBEB in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info