734666
14
Zoom out
Zoom in
Previous page
1/32
Next page
14
TQBJ2081
DAB/DAB+
Preparation
Press [RADIO] repeatedly to select “DAB+”.
Note:
If you select “DAB+” for the first time, the system will tune
automatically.
Manual tuning
1 Press [RADIO MENU] repeatedly to select
“MANUAL SCAN”.
2 Press [Y, U] to select the frequency block and
then press [OK].
If no station is detected, “SCAN FAILED” is shown.
Adjust the antenna and try again.
To tune automatically
1 Press [RADIO MENU] to select “AUTO SCAN” and
then press [OK].
“START?” is shown.
2 Press [OK] to start tuning.
“DAB AUTO SCAN” is shown.
If no station is detected, “SCAN FAILED” is shown.
Do manual tuning.
Selecting a station
Press [3] or [5] to select a station.
Or press [2/3] or [5 /6] on the unit when
“STATION” is selected as the tune mode*
1
.
Note:
Preset frequencies are erased after you do automatic tuning.
Memory presetting
You can preset up to 20 stations.
Channel 1 to 5 will be set as the favourite stations under
“Changing the stations stored under [FAVOURITE] [1] to
[5]”. (~right)
While listening to a DAB/DAB+ broadcast
1 Press [PROGRAM].
2 Press the numeric buttons to select a preset
number.
Do steps 1 through 2 again to preset more stations.
The new station replaces any station that occupies the
same preset number.
Note:
You cannot preset a station when the station is not
broadcasting or when you have selected a secondary service.
Selecting a preset station
Press the numeric buttons, [2] or [6] to select the
preset station.
Or press [2/3] or [5 /6] on the unit when
“PRESET” is selected as the tune mode*
1
.
You can select channel 1 to 5 by pressing one of
[FAVOURITE] [1] to [5] on the unit.
*
1
: To change the tune mode
1 Press [RADIO MENU] repeatedly to select
“TUNE MODE”.
2 Press [Y, U] to select “STATION” or “PRESET”
and then press [OK].
Changing the stations stored under
[FAVOURITE] [1] to [5]
You can easily change the stations stored under
[FAVOURITE] [1] to [5].
While listening to the radio broadcast
Press and hold one of [1] to [5] until “P ” is shown.
(“ ” represents a number.)
Note:
When you change the station stored under [FAVOURITE] [1] to
[5], channel 1 to 5 are also changed to the same
corresponding stations.
Secondary service
You can listen to secondary services when “ ” is shown.
1 Press [RADIO MENU] repeatedly to select
“DAB SECONDARY”.
2 Press [Y, U] to select the secondary service and
then press [OK].
To cancel, select “PRIMARY”.
Note:
The setting is cancelled when you select other stations.
Viewing available information
You can view the following information on the display
panel:
Press [DISPLAY].
Automatic clock adjustment
You can set the clock to update automatically.
1 Press [RADIO MENU] repeatedly to select
“AUTO CLOCK ADJ”.
2 Press [Y, U] to select “ON ADJUST” and then
press [OK].
To cancel, select “OFF ADJUST”.
Dynamic label Information about the DAB
broadcast
PTY display Programme type
Ensemble label The name of the ensemble
Frequency display The frequency block and
frequency
Time display Current time
SC-HC2020 EB.GN TQBJ2081 En_Rev 1-spec.fm Page 14 Wednesday, April 25, 2018 9:07 AM
offset printing rev. 1
14


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-sc-hc2020

Reset search

  • How to connect to panasonic HC2020-3c02 via Bluetooth Submitted on 15-10-2022 at 12:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HC2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HC2020 in the language / languages: English as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HC2020

Panasonic SC-HC2020 User Manual - German, Dutch, French, Italian - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info