612812
14
Zoom out
Zoom in
Previous page
1/16
Next page
14
RQTV0294
g AMPLIFIER SECTION
RMS OUTPUT POWER both channel
driven simultaneously
10 % total harmonic distortion (THD)
1 kHz 3 W per channel (6 )
Input Music Port
Sensitivity 100 mV, 15 k
Terminal Stereo, 3.5 mm jack
Output Headphone
Terminal
Stereo, 3.5 mm jack
(16
to 32 )
Option Port Version 1
g TUNER SECTION
Frequency range
FM 87.50 MHz to 108.00 MHz (50 kHz)
g DAB SECTION
DAB memories 20 channels
Frequency Band (Wavelength)
Band III (UK Only)
11B to 12D (218.640 MHz to 229.072 MHz)
Band III (Europe)
5A to 13F (174.928 MHz to 239.200 MHz)
g CD SECTION
Disc played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3)
(3) MP3
Sampling frequency
CD 44.1 kHz
MP3 32 kHz, 44.1 kHz, 48 kHz
Bit rate
MP3 32 kbps to 384 kbps
Decoding 16/20/24 bit linear
Pick up
Wavelength 785 nm
Laser power CLASS 1
Audio Output (Disc)
Number of channels 2 channel
Audio performance
Frequency response (CD-Audio)
20 Hz to 20 kHz
Wow and flutter Below measurement limit
Digital filter 8
D/A converter MASH (1 bit DAC)
g USB SECTION
Media file format support MP3 (*.mp3)
g SPEAKER SECTION
Type 1 way, 1 speaker system (Bass reflex)
Speaker unit(s)
Full range 7 cm cone type
Impedance 6
Input power (IEC) 3 W (Max)
Dimensions (W x H x D)
120 mm x 202.8 mm x 133.5 mm
g GENERAL
Power supply AC 230 to 240 V, 50 Hz
Power consumption 30 W
Dimensions (W x H x D)
252.5 mm x 202.8 mm x 133.5 mm
Mass
With speakers Approx. 3.20 kg
Without speakers Approx. 1.90 kg
Operating temperature range
0 °C to +40 °C
Operating humidity range
35 % to 80 % RH (no condensation)
Power consumption in standby mode:
2.6 W (approx.)
Notes:
Specifications are subject to change without
notice.
Total harmonic distortion is measured by the
digital spectrum analyzer.
Specifications
DAB
DAB reception is poor
Keep the antenna away from computers, televisions, other cables and cords.
Use an outdoor antennas. ( page 7)
DATA Data broadcast being received over the DAB broadcast signal. Cannot be used on this unit.
SCRAMBLED The broadcast station being received cannot be accessed.
NO SERVICE The station is currently not broadcasting.
NO SIGNAL
This station cannot be received. Check your antenna. ( page 4)
SCAN FAILED
Stations are not receivable. Check your antenna and try Auto scanning. ( page 4, 9)
STATION FULL
DAB station memory is full. Use the following method to clear station memory.
1. Press [DAB MENU].
2. Press [ or , ALBUM] to select “STATION CLEAR”.
3. Press [ENTER]. “OK? Push ENTER” is displayed.
4. Press [ENTER].
Station memory is erased and the unit automatically begins Auto scanning.
Troubleshooting guide (continued)
SC-EN38DB_EB (RQTV0294)_MP.indd 14 2/18/2008 2:13:47 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-EN38DB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-EN38DB in the language / languages: English as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info