612812
7
Zoom out
Zoom in
Previous page
1/16
Next page
7
RQTV0294
Press [DAB/FM/MUSIC P.] to select “FM”.
Press [PLAY MODE] to select “MANUAL”.
Press [u, 2] or [i, 1] to select the frequency of the required
station.
To tune automatically
Press [DAB/FM/MUSIC P.] to select “FM”.
Press [PLAY MODE] to select “MANUAL”.
Press and hold [u, 2] or [i, 1] until the frequency starts
changing rapidly.
Auto tuning stops when it finds a station.
To cancel auto tuning, press [u, 2] or [i, 1] once again.
Auto tuning may not function when there is excessive interference.
Manual tuning
The unit can play MP3, a method of compressing audio without overly
hurting audio quality.
When creating MP3 files to play on this unit
Maximum number of tracks and albums: 999 tracks and 256 albums.
Compatible compression rate: Between 64 kbps and 320 kbps (stereo).
128 kbps (stereo) is recommended.
Disc formats: ISO9660 level 1 and level 2 (except for extended formats).
The time for reading TOC depends on the number of the tracks, the
folders or folder structures.
Limitations on MP3
This unit is compatible with multi-session but if there are a lot of sessions
it takes more time for play to start. Keep the number of sessions to a
minimum to avoid this.
This unit cannot play files recorded using packet write.
If the disc includes both MP3 and normal audio data (CD-DA), the unit
plays the type recorded in the inner part of the disc.
If the disc includes both MP3 and other types of audio data (e.g. WMA or
WAV), the unit plays only the MP3.
Depending on how you create MP3 files, they may not play in the order
you numbered them or may not play at all.
DAB
DAB stands for digital audio broadcasting. It is a new form of radio that
is broadcast digitally. Unlike regular analogue broadcasting, digital radio
deteriorates less, and is thus able to provide quality sound close to that of
a disc.
DAB structure
Bands
There are two types of DAB bands, “BAND III” (Receivable in this unit) and
“L BAND” (Not broadcast in the United Kingdom, and not receivable on this
unit).
Frequencies
There are 41 frequencies on BAND III. Among those frequencies, 7 are
used in the United Kingdom (current as of January, 2008).
Ensemble, station and service
The number of stations that make up one frequency differ between
DAB and analogue radio. Analogue stations all broadcast on different
frequencies, even if it is the same company doing the broadcasting. With
DAB however, it is possible to broadcast a number of stations on the same
frequency.
In DAB terminology, a group of stations on the same frequency is called an
ensemble.
As shown in the diagram, an ensemble consists of a group of stations which
have primary services, they can also have secondary services. This means,
for example, that commentary on sports events from different areas can all
be broadcast at once.
DAB reception method on this unit
Depending on the region there is a difference between broadcast frequency
and stations broadcast along the same frequency. For this reason, a
memory of receivable stations should first be created and then selected
from those memorized stations as the reception method.
DAB Auto Scan
This function searches for currently receivable stations and inputs them into
unit memory.
When DAB is selected for the first time, this function starts automatically.
Even if the station is stored into memory, some stations may not broadcast
depending on the time of day etc. If this occurs, “NO SERVICE” is
displayed.
Station Memory Updating
When there is a station name change, or a new station begins
broadcasting, the unit memory is automatically updated when:
The previous station name is displayed by selecting “STATION TUNE”.
One of the stations already broadcasting on the same frequency with the
new station is displayed by selecting “STATION TUNE”.
Deleting stations that are no longer broadcasting is not automatic. If you
want to delete a station, perform Auto scan again and the new memory
is created.
When a new frequency begins broadcasting, stations on the new
frequency are not automatically added to memory. Perform Auto scan
to add them to memory. Also, you may need to change the Auto scan
range if the new frequency is outside the factory set Auto scan range
( page 9).
STATION TUNE
You can select stations from the memory created as shown above in
alphanumeric order. You can easily select your favorite stations by using
presets ( page 8).
DAB outdoor antenna
RQTV0123
6
Getting started (continued)
Optional antenna connections
FM outdoor antenna AM outdoor antenna DAB outdoor antenna
FM outdoor antenna
(not included)
75 coaxial cable
(not included)
AM loop antenna
(included)
AM outdoor antenna
(not included)
Be sure to fully
tighten the screw.
DAB outdoor antenna
(not included)
Never use an outdoor antenna during a lightning storm.
You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally
along a window or other convenient location.
Step 2
- Inserting batteries into the remote control
Batteries
Insert so the poles (+ and –) match those in the remote control.
Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.
Do not use rechargeable type batteries.
Mishandling of batteries in the remote control can cause electrolyte
leakage, which may cause a fi re.
Do not:
mix old and new batteries;
use different types of batteries at the same time;
heat or expose to fl ame;
take apart or short-circuit;
attempt to recharge alkaline or manganese batteries;
use batteries if their covering has been peeled off.
Use
Aim at the remote control sensor, avoiding obstacles, at a maximum
range of 7
m directly in front of the unit.
Refer to page 7 for remote control signal sensor position.
Step 3
- DEMO function


When the unit is rst plugged in, a demonstration of its functions may be
shown on the display.
If the demo setting is off, you can show a demonstration by selecting
“DEMO ON”.
Press and hold [
7, -DEMO].
The display changes each time the button is held down.
 
While in standby mode, select “DEMO OFF” to reduce power
consumption.
Never use an outdoor antenna during a lightning storm.
DAB operation
Press [DAB/FM/MUSIC P.] to enter DAB mode.
The unit comes on.
“SCAN FAILED” appears if no stations are memorized. If this occurs,
adjust the antenna and try Auto scanning or change the Auto scan
frequency range ( page 9 ).
Press [PLAY MODE] to select “STATION TUNE”.
Each time you press the button:
“STATION TUNE” “PRESET TUNE”
Press [u, 2] or [i, 1] to select a station.
The station name changes in alphanumeric order.
If you are selecting DAB for the
first time, “DAB Auto Scan...”
is displayed, stations that
are currently receivable are
memorized.
When a frequency is tuned the
ensemble corresponding to the
frequency is displayed.
The station first in alphanumeric
order is broadcast.
DAB
DAB
DAB
DAB
Note
Note
Note
Be sure to fully
tighten the screw.
DAB outdoor antenna
(not included)
SC-EN38DB_EB (RQTV0294)_MP.indd 7 2/18/2008 2:13:23 PM
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-EN38DB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-EN38DB in the language / languages: English as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info