533275
49
Zoom out
Zoom in
Previous page
1/56
Next page
49
VQT2Q72
On the unit’s display Page
F99 The unit fails to operate properly. Press [Í/I] on the main unit to switch the unit to
standby for 3 seconds. Now press [Í/I] on the main unit again to turn the unit on.
HDMI ONLY Some BD-Video discs can only be output with HDMI.
NET [BTX77] Displays while VIERA CAST is starting up. 30
No PLAY There is a viewing restriction on a BD-Video or DVD-Video. 35
No READ The media is dirty or badly scratched. The unit cannot play. 3
PLEASE WAIT The unit is carrying out internal process.This is not a malfunction. You cannot operate
the unit while “PLEASE WAIT” is displayed.
When connected to TV (VIERA) with HDAVI Control 4, and power supply is turned off
by the “Intelligent Auto Standby” function on the TV side.
27
REMOVE The USB device is drawing too much power. Remove the USB device. 16
SET
(“ ” stands for a number.)
The remote control and main unit are using different codes. Change the code on the
remote control.
Press and hold [OK] and the indicated number button at the same
time for more than 5 seconds.
47
UNFORMAT You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL or
DVD-RW (DVD-Video format).
UNSUPPORT You have inserted a media the unit cannot play.
You tried to operate with a non-compatible USB device.
40 – 43
41
U59 The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when installing the unit. Do not block the
cooling fan on the rear of the unit.
U72
U73
The HDMI connection acts unusually.
The connected equipment is not HDMI compatible.
Please use HDMI cables that have the HDMI logo (as shown on the cover).
The HDMI cable is damaged.
H or F
(“ ” stands for a number.)
Check and correct the speaker connections.
There is something unusual. (The service number displayed after H and F depends
on the unit’s condition.)
Check the unit using the troubleshooting guide. If the service number does not
disappear, do the following.
1 Disconnect the plug from the household mains socket wait a few seconds, then
reconnect it.
2Press [Í/I] to turn the power on. (The unit may be fixed.)
If the service number does not disappear despite doing the above, request service
from the dealer. Inform the dealer of the service number when requesting service.
8
44 – 47
DOCK UNLOCKED The iPod docking switch lever is not locked in position.
Make sure that the iPod docking switch lever is properly pushed back into place.
28
IPOD OVER CURRENT ERROR
The iPod is drawing too much power. Remove the iPod, and turn the unit off and on again.
START [BTX77]
The system is being restarted during the firmware update. Please do not turn off power.
30
UPD/ [BTX77] The firmware is being updated. 30
FINISH [BTX77] The firmware update is complete. 30
NOT CONDITIONAL The requested operation cannot be conducted.
NOT CONNECTED The iPod is not connected or it is not correctly connected. Reconnect the iPod.
The iPod cannot be operated. Check that there is nothing wrong with the iPod.
28
ILLEGAL OPEN The sliding door is not in the correct position. Turn the main unit off and on again.
llllllll
The main unit could not save the modified settings. Some settings may need to be reset.
Reference
SC-BTX77&75EGEB-VQT2Q72_eng.book 49 ページ 2010年2月1日 月曜日 午前9時33分
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BTX77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BTX77 in the language / languages: English as an attachment in your email.

The manual is 12,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-BTX77

Panasonic SC-BTX77 User Manual - German - 112 pages

Panasonic SC-BTX77 User Manual - Dutch - 112 pages

Panasonic SC-BTX77 User Manual - Danish - 112 pages

Panasonic SC-BTX77 User Manual - French - 56 pages

Panasonic SC-BTX77 User Manual - Italian - 112 pages

Panasonic SC-BTX77 User Manual - Polish - 112 pages

Panasonic SC-BTX77 User Manual - Swedish - 112 pages

Panasonic SC-BTX77 User Manual - Spanish - 112 pages

Panasonic SC-BTX77 User Manual - Finnish - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info