533275
31
Zoom out
Zoom in
Previous page
1/56
Next page
31
VQT2Q72
Network settings [BTX77]
These settings are used if you will connect this unit to the Internet. (> 38)
The connection to the Internet may take time or the Internet may not be connected depending on the connection environment.
It is required that you use a broadband connection.
Preparation
Connect to a broadband network. (> 11)
Testing of “IP Address / DNS Settings”
Always test the connection when a LAN cable is connected.
1 While stopped
Press [BD/SD] to select “BD/DVD”.
2 Press [SETUP].
3 Press [3, 4] to select “Network Settings” and
press [OK].
4 Press [3, 4] to select “IP Address / DNS
Settings” and press [OK].
5 Press [3, 4] to select “Connection Test” and
press [OK].
“Testing...”: The test is in progress.
“Pass”: The connection is completed.
Press [RETURN] to exit.
“Fail”: Please check the connection and settings.
Perform the “Connection Test” also when any
change was made to the “IP Address / DNS
Settings”.
If the connection test fails, it may be necessary to set the
MAC address of this unit at the router side. The MAC
address can be displayed by pressing [SETUP] and
selecting “Network Settings”.
N
RUT
E
R
K
O
IP Address/DNS Settings
Connection Test
OnOn
OnOn
OnOn
IP Address Auto-Assignment
DNS-IP Auto-Assignment
IP Address
Subnet Mask
Gateway Address
Primary DNS
Secondary DNS
Connection Speed Auto-Config
Connection Speed Setting
NOTE
RETURN
Network Settings
IP Address / DNS Settings
Proxy Server Settings
MAC Address: xx-xx-xx-xx-xx-xx
OK
Network Service
Setting the IP address
In most cases, default settings can normally be used
without making any changes.
Set the IP address only when the router has no DHCP
server functions or when the router’s DHCP server
function is disabled.
After performing steps 1 4 (D left)
5 Press [3, 4] to select “IP Address
Auto-Assignment” and press [2, 1] to select
“Off”.
6 Press [3, 4] to select “IP Address”, “Subnet
Mask” or “Gateway Address” and press [OK].
7 Enter numbers with the numbered buttons and
press [OK].
After checking the specifications for your broadband
router, enter each number.
If the number is unknown, then check the number of
other devices such as personal computers connected
via a LAN cable. Assign a different number from those
of other devices for the “IP Address” and the same
number for others.
If a wrong number is entered, then press [CANCEL].
8 Press [2, 1] to select “Yes” and press [OK].
The numeric input range is between 0 and 255.
Setting the DNS-IP
In most cases, default settings can normally be used
without making any changes.
When setting an assigned DNS server from your Internet
service provider, perform the following settings.
After performing steps 1 4 (D left)
5 Press [3, 4] to select “DNS-IP
Auto-Assignment” and press [2, 1] to select
“Off”.
6 Press [3, 4] to select “Primary DNS” or
“Secondary DNS”and press [OK].
7 Enter numbers with the numbered buttons and
press [OK].
Follow the instructions given by your Internet service
provider and enter the numbers.
If the number is unknown, then check the number of
other devices such as personal computers connected
via a LAN cable and assign the same number.
If a wrong number is entered, then press [CANCEL].
8 Press [2, 1] to select “Yes” and press [OK].
The numeric input range is between 0 and 255.
NOTE
192
.
.
.
1
Primary DNS
Please input Primary DNS and press
[OK]. Press [CANCEL] to delete the selected
character. To clear this setting, delete all
characters and press [OK].
Number
0
-
9
NOTE
Advanced operations
SC-BTX77&75EGEB-VQT2Q72_eng.book 31 ページ 2010年1月6日 水曜日 午後7時54分
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BTX77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BTX77 in the language / languages: English as an attachment in your email.

The manual is 12,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-BTX77

Panasonic SC-BTX77 User Manual - German - 112 pages

Panasonic SC-BTX77 User Manual - Dutch - 112 pages

Panasonic SC-BTX77 User Manual - Danish - 112 pages

Panasonic SC-BTX77 User Manual - French - 56 pages

Panasonic SC-BTX77 User Manual - Italian - 112 pages

Panasonic SC-BTX77 User Manual - Polish - 112 pages

Panasonic SC-BTX77 User Manual - Swedish - 112 pages

Panasonic SC-BTX77 User Manual - Spanish - 112 pages

Panasonic SC-BTX77 User Manual - Finnish - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info