371565
43
Zoom out
Zoom in
Previous page
1/56
Next page
43
RQT9479
Speaker installation options
You can attach all of the speakers (except subwoofer) to a wall.
The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. Consult a qualified building
contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.
Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have
strong enough support. Improper attachment may result in damage to the wall or speakers.
e.g.
Making the wireless link
1
Turn on the wireless system.
2
Turn on the main unit.
The wireless link indicator on the main unit will be turned on.
For 4.1 ch settings, go to step 8.
WIRELESS LINK
POWER
Wireless unit on/off button [POWER C I, ]
Use this button to turn the unit on and off.
C I: The unit is on. : The unit is off.
WIRELESS LINK indicator
Red: The unit is on and the wireless link is deactivated.
Green: The unit is on and the wireless link is activated.
SLP
STCT
RDS
RND
PGM
EQ
PRG
SRDE.
PL
DDTS
W2
WS
W1
If the indicator is flashing, refer to the
“Optional wireless system (SH-FX70)” in
the Troubleshooting guide. (> 46)
e.g.
3
Turn on the additional wireless system.
4
While pressing [5/9] on the main unit, press the
numbered button [3] on the remote control until “P” lights in
the main unit’s display.
5
While “P” is displayed, press
[I/D SET] on the rear of the
additional wireless system.
The indicator on the additional
system turns green.
If “P” goes off before you press
[I/D SET], repeat step 4 and
then continue the procedure.
6
While pressing [5/9] on the main unit, press the
numbered button [3] on the remote control.
7
Turn off and on the additional wireless system.
Make sure the indicator on the additional wireless system lights
up green.
8
Start the EASY SETUP to configure the speaker
settings. (> 12)
After changing the speaker settings start play on the main unit.
I/D SET
Use a pointed object.
The main unit will not recognize the additionally added speakers unless the speaker settings have been re-configured in the EASY
SETUP. (> 12)
Be sure to re-configure the system each time speakers are added or removed.
If you should change the digital transmitter, repeat the pairing steps of the wireless system.
If 2 wireless system units are used, repeat the pairing steps for each unit, 1 at a time.
You cannot use the wireless system with SH-FX65T or SH-FX67T digital transmitter.
NOTE
Attaching to a wall
1 Drive a screw (not included) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
4.0 mm (
5
/
32
)
7.5 mm to 9.4 mm
(
19
/
64
to
3
/
8
)
At least 30 mm (1
3
/
16
)
3 mm to 5 mm (
1
/
8
to
3
/
16
)
Wall or pillar
DO
NOT
DO
In this position,
the speaker will
likely fall if
moved to the
left or right.
Move the
speaker so that
the screw is in
this position.
Front speakers
e.g.,
Preventing the speakers from falling
Screw eye
(not included)
Wall
Approx.
150 mm
(5
29
/
32
)
Rear of the speaker
String (not included)
Thread from the wall to the speaker and tie tightly.
Optional speaker
settings
BTX70PP_eng.book 43 ページ 2009年6月24日 水曜日 午後3時42分
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic sc btx70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic sc btx70 in the language / languages: English as an attachment in your email.

The manual is 13,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic sc btx70

Panasonic sc btx70 User Manual - German - 57 pages

Panasonic sc btx70 User Manual - German - 112 pages

Panasonic sc btx70 User Manual - Dutch - 57 pages

Panasonic sc btx70 User Manual - Danish - 55 pages

Panasonic sc btx70 User Manual - French - 56 pages

Panasonic sc btx70 User Manual - Italian - 112 pages

Panasonic sc btx70 User Manual - Polish - 55 pages

Panasonic sc btx70 User Manual - Swedish - 57 pages

Panasonic sc btx70 User Manual - Spanish - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info