452165
44
Zoom out
Zoom in
Previous page
1/52
Next page
44
VQT3M52
Optional speaker settings
Speaker installation
option
You can attach all of the speakers (except subwoofer) to a wall.
The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg per screw. Consult a
qualified building contractor when attaching the speakers to
a wall. Improper attachment may result in damage to the wall
and speakers.
Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
[BTT262]
Preparation
Remove the speaker stands.
1 Remove the screws and the bracket (A) from the
speaker.
2 Detach the speaker stand.
Remove the speaker cable from the groove (B).
Pull out the speaker cable from the stand, making sure
to match the direction of the speaker connector and the
hole on the stand.
Keep the removed stands, screws and brackets for future use.
1 Drive a screw (not supplied) into the wall.
A At least 30 mm
B 4.0 mm
C 7.0 mm to 9.4 mm
D Wall or pillar
E 5.5 mm to 7.5 mm
2 Fit the speaker securely onto the screw(s)
with the hole(s).
Use the measurements indicated below to identify the
screwing positions on the wall.
Leave at least 20 mm of space above the speaker and 10 mm
on each side to allow enough space for fitting the speaker.
Front speaker
[BTT362] Attach to a wall without the base.
F 40 mm
G 63 mm
H 322 mm
I 37 mm
J 45 mm
K 190 mm
To avoid speaker dropping
Consult a qualified building contractor to avoid damage to
the wall or speakers.
Use a string of less than 2.0 mm, which is capable of
supporting over 10 kg.
Attaching to a wall
1
2
e.g., [BTT362] Front speaker
DO NOT DO
In this position, the
speaker will likely fall if
moved to the left or right.
Move the speaker so that
the screw is in this
position.
[BTT362]
[BTT262]
A String (not supplied)
B Screw eye (not supplied)
C Less than 10 cm
D Rear of the speaker
SCBTT362_262_EB_VQT3M52_eng.book 44 ページ 2011年1月25日 火曜日 午後8時22分
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BTT262 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BTT262 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-BTT262

Panasonic SC-BTT262 User Manual - German - 52 pages

Panasonic SC-BTT262 User Manual - Dutch, Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info