533950
36
Zoom out
Zoom in
Previous page
1/52
Next page
36
VQT3X51
Unit Settings
Press [OK] to show the following settings:
¾ Front Panel Display
Changes the brightness of the unit’s display.
If “Auto” is selected, the display is set to bright
and only dimmed during playback.
¾ Edit User Information
Change the user information registered in the
Home menu.
Quick Start
Speed of startup from power off is increased.
When set to “On”, the internal control unit will be
powered and the idle power consumption will
increase compared to when set to “Off”. (About
the power consumption > 45)
Remote Control Code
Change the remote control code if other
Panasonic products react to this remote control.
Firmware Update (> 16)
Press [OK] to show the following settings:
¾ Automatic Update Check
When this equipment remains connected to the Internet,
it will check for the latest firmware version when it is
turned on and you can update it if necessary.
¾ Update Now
You can update the firmware manually if a
firmware update is available.
System Information
Press [OK] to show the following settings:
¾ License
Information about the software used by this unit
is displayed.
¾ Firmware Version Information
Display firmware version of this unit and
wireless LAN module.
Restore Default Settings
This returns all values in the Setup menu and the
Option menu to the default settings, except for
some settings of network, ratings, remote control
code, language, etc.
A Volume (Channel balance)
B Delay time for the Center speaker
C Delay time for the Surround speakers
Adjusting speaker level
(Effective when playing multi-channel audio)
1 Select “Test” and press [OK].
A test signal is output.
2 While listening to the test signal
Press [3, 4] to adjust the volume of each
speaker ( ).
The volume can be adjusted between r6 dB
to s6 dB.
Set each speaker level according to the
volume of the Front (L) and Front (R)
speaker volume respectively.
3 Press [OK].
The test signal stops.
Speaker settings
0
00
0.0
0.0
ms
Complete
Te st
LS
RL
RS
dB
dBdB
ms
C
0
dB
SW
dB
0
SC-BTT190P_eng.book 36 ページ 2012年2月20日 月曜日 午後5時5
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BTT196 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BTT196 in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info