533435
43
Zoom out
Zoom in
Previous page
1/52
Next page
Reference
Optional speaker
settings
43
VQT2Q52
Reference
Troubleshooting guide
Before requesting service, please perform the
following steps.
The following do not indicate a problem with this unit:
Regular disc rotating sounds.
Image disturbance during search.
Unit doesn’t respond to remote control or
front panel buttons.
Press and hold [
Í
/I] on the main unit for 5 seconds.
j
If still unable to turn the unit off, disconnect the AC mains lead, wait 1
minute, then reconnect the AC mains lead.
Cannot eject disc.
The unit may have a problem.
While the unit is off, press and hold [SKIP
9
] on the remote control and
[
<
OPEN/CLOSE] on the unit at the same time for more than 5 seconds.
To return to the factory preset.
Select “Yes” in “Default Settings” in the Setup menu. (
>
40)
To return all settings to the factory preset.
Reset the unit as follows:
While the unit is off, press and hold [+ VOLUME], [
<
OPEN/CLOSE]
and [
Í
/I] on the main unit at the same time for more than 5 seconds.
The remote control doesn’t work properly.
The remote control and main unit are using different codes. Change the
code on the remote control. (
>
22)
It may be necessary to set the code of the remote control again after
changing the batteries for remote control. (
>
22)
Disc cannot be played.
The disc is dirty. (
>
7)
Check the region code.
Still pictures (JPEG) do not playback normally.
The images that were edited on the PC, such as Progressive JPEG, etc.,
may not playback.
The TV tuner mode is not displayed when the TV is switched
on.
This phenomenon may occur, depending on the TV setting, when “Quick
Start” is set to “On”.
Depending on the TV, this phenomenon may be prevented by
reconnecting the HDMI cable to a different HDMI input terminal or by
changing the HDMI auto connection setting.
The contents of the USB device cannot be read.
If inserted during playback, the USB device may not be
recognised by this unit.
You have forgotten your ratings password.
You want to cancel the ratings level.
While the disc tray is empty and “BD/DVD” is selected as a source, press
and hold [SKIP
:
] on the remote control and [
1
] (Play) on the unit at
the same time for more than 5 seconds. The ratings level returns to the
factory preset.
No power.
Insert the AC mains lead securely into a household mains socket. (
>
18)
The unit switches to standby mode.
When the time set for the sleep timer has passed, the power will be
turned off. (
>
8)
One of the unit’s safety devices is activated. Press [
Í
/I] on the main unit
to turn the unit on.
The main unit is turned off when the input for the TV is
changed.
This is a normal phenomenon when using VIERA Link (HDAVI Control 4
or later). For details please read the operating instructions for the TV.
The display is dim.
Change “FL Display” in the Setup menu. (
>
39)
The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
An incorrect resolution is selected in “HDMI Video Format”. Reset the
setting as follows:
While the disc tray is empty and “BD/DVD” is selected as a source, press
and hold [
1
] (Play) and [
] (Stop) on the main unit at the same time for
more than 5 seconds to cancel the setting.
When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not
output in bitstream, select “Yes” in “Default Settings” and make proper
settings. (
>
40)
The unit and television are using different video systems. While stopped,
keep pressing [
] (Stop) and [
<
OPEN/CLOSE] on the main unit for 5
or more seconds. The system switches from PAL to NTSC or vice versa.
The system used on the disc doesn’t match your television.
PAL discs cannot be correctly viewed on an NTSC television.
This unit can convert NTSC signals to PAL60 for viewing on a PAL
television (“NTSC Contents Output” in the “Picture”).
Video is not output.
Set the “High Clarity Sound” in the
playback
menu to “Off to use the
VIDEO OUT terminal. (
>
35)
Video is not output in high definition.
Confirm that “HDMI Video Format” in the Setup menu is set properly.
(
>
39)
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
Confirm the “TV Aspect” is set properly. (
>
39)
Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (
>
26) on the unit is also possible.)
After choosing “Home Cinema” in “Speaker Selection” with the
TV’s remote control, the TV’s input selection also changes.
Disconnect the HDMI cable from the TV and reconnect it to a different
HDMI IN terminal.
Do you have the latest firmware installed?
Firmware updates may be released to correct operating irregularities that
are discovered with certain movies. (
>
21)
4
Make the following checks.
If the problem remains unresolved, consult your
dealer for instructions.
General operation
Power
Displays
TV screen and video
SCBT735_330_230EBEPEG_VQT2Q52-B.book 43 ページ 2010年2月9日 火曜日 午前10時51分
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BT735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BT735 in the language / languages: English as an attachment in your email.

The manual is 8,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-BT735

Panasonic SC-BT735 Quick start guide - English - 2 pages

Panasonic SC-BT735 Quick start guide - German - 32 pages

Panasonic SC-BT735 User Manual - German - 52 pages

Panasonic SC-BT735 Quick start guide - Dutch - 32 pages

Panasonic SC-BT735 User Manual - Dutch - 104 pages

Panasonic SC-BT735 Quick start guide - Danish, French, Italian, Swedish - 32 pages

Panasonic SC-BT735 User Manual - Turkish - 52 pages

Panasonic SC-BT735 Quick start guide - Spanish - 32 pages

Panasonic SC-BT735 User Manual - Spanish - 104 pages

Panasonic SC-BT735 User Manual - Spanish - 52 pages

Panasonic SC-BT735 User Manual - Finnish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info