533274
21
Zoom out
Zoom in
Previous page
1/52
Next page
Getting started
21
VQT2M13
Network Easy Setting (Internet Connection Check)
Refer to the operating instructions of the hub or router.
You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (> 38)
You can redo these settings individually using “Network”. (> 38)
[BT730] [BT330] [BT230] Do not use this device to connect to any
wireless network for which you do not have usage rights.
During automatic seaches in a wireless network environment, wireless
networks (SSID*) for which you do not have usage rights may be
displayed; however, using these networks may be regarded as illegal
access.
[BT730] [BT330] [BT230] After performing network settings on this unit,
the settings (encryption level, etc.) of the Wireless router (Access point)
might change. When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the settings of
Wireless router (Access point).
* An SSID (Service set IDentification) is a name used by wireless LAN to
identify a particular network. Transmission is possible if the SSID matches
for both devices.
Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
These updates are available free of charge.
This unit is capable of checking the firmware automatically
when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen
is displayed.
If downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
http://panasonic.net/support/
(This site is in English only.)
To show the firmware version on this unit. (> 38, “System
Information”)
DO NOT DISCONNECT the unit from the AC power or perform
any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the
unit’s display. Unit will restart and the following screen will be
displayed.
You can perform update anytime by selecting “Firmware Update” in the
Setup menu. (> 38)
Downloading will require several minutes. It may take longer or the Internet
may not be connected depending on the connection environment.
If you do not want to check for the latest firmware version, set “Automatic
Update Check” to “Off”. (> 38)
1. LAN cable connection or
Connection to access point
:Pass Connection
and settings
of the hub
and router
Settings of
"IP Address /
DNS
Settings“
(> 38)
2. IP address setting :Fail
3. Connection to gateway :Fail
1. LAN cable connection or
Connection to access point
:Pass
2. IP address setting :Pass
3. Connection to gateway :Fail
Display Check the following
Cannot find the server.
(Error code: B019)
“Primary DNS” and “Secondary
DNS” Settings of “IP Address /
DNS Settings” (> 38)
Failed to connect to
the server.
(Error code: B020)
The server may be busy or the
service may have been
suspended. Please wait a few
moments, and then try again.
Settings of “Proxy Server
Settings” (> 38) and the router.
OK
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet : Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the operating instructions for the cause
of the error and the solution for it.
Press [OK].
Firmware updates
Firmware Update
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
RETURN
OK
Yes No
The firmware was updated.
Current Installed Version:
x.xx
RETURN
OK
SC-BT230_330_730P_PC_VQT2M13_eng.book 21 ページ 2010年3月16日 火曜日 午後5時57分
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BT235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BT235 in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info