533956
37
Zoom out
Zoom in
Previous page
1/48
Next page
Reference
37
VQT2S28
The images from this unit do not appear on the TV.
Picture is distorted.
Jittering occurs.
An incorrect resolution is selected in “HDMI Video Format”.
Reset the setting as follows:
While the disc tray is empty and “BD/DVD” is selected as a
source, press and hold [1] (Play) and [] (Stop) on the main
unit at the same time for more than 5 seconds to cancel the
setting.
When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio
are not output in bitstream, select “Yes” in “Default Settings”
and make proper settings. (> 34)
The unit and television are using different video systems.
While stopped, keep pressing [] (Stop) and [< OPEN/
CLOSE] on the main unit for 5 or more seconds. The system
switches from PAL to
NTSC
or vice versa.
The system used on the disc doesn’t match your television.
PAL discs cannot be correctly viewed on an NTSC
television.
This unit can convert NTSC signals to PAL60 for viewing
on a PAL television (“NTSC Contents Output” in the
“Picture”).
Video is not output.
Set the “High Clarity Sound” in the playback menu to “Off” to
use the VIDEO OUT terminal. (> 30)
Video is not output in high definition.
Confirm that “HDMI Video Format” in the Setup menu is set
properly. (> 33)
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
Confirm the “TV Aspect” is set properly. (> 33)
Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” (> 21) on the unit is also
possible.)
After choosing “Home Cinemain “Speaker Selection” with
the TV’s remote control, the TV’s input selection also changes.
Disconnect the HDMI cable from the TV and reconnect it to a
different HDMI IN terminal.
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
Check connections to speakers and other equipment.
(> 12s16)
To output audio from a device connected with an HDMI cable,
set “HDMI Audio Output” to “On” in the Setup menu. (
>
34)
When “BD-Video Secondary Audio” is set to “On”, Dolby
TrueHD, Dolby Digital Plus, DTS-HD Master Audio and
DTS-HD High Resolution Audio are output as Dolby Digital
or DTS Digital Surround.
Re-master will not work when the bitstream signal is output
from the HDMI AV OUT terminal. (> 30)
Depending on the connected equipment, the sound may be
distorted if this unit is connected with an HDMI cable.
No surround sound.
Press [SURROUND] to select a surround effect. (> 19)
Cannot switch audio.
When audio is output from the HDMI AV OUT terminal, set
“Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD” or
“MPEG Audio” to “PCM”. (> 32)
No sound from the TV.
Press [EXT-IN] to select the corresponding source. (> 18)
The ARC (Audio Return Channel) function is not available.
Instead, use an optical digital audio cable or an audio cable
to have the TV sound. (> 14, 15)
If the TV is not ARC compatible and only the HDMI connection
is used, an extra audio connection is necessary (
>
14, 15).
TV screen and video Sound
SCBT222EBEG_VQT2S28-B.book 37 ページ 2010年2月12日 金曜日 午後1時4分
37


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-sc-bt222

Reset search

  • bonjour sabt-222 home salon en panne avec arc
    merci
    stcalain@orange .fr Submitted on 27-2-2022 at 14:03

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BT222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BT222 in the language / languages: English as an attachment in your email.

The manual is 6,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-BT222

Panasonic SC-BT222 User Manual - German - 96 pages

Panasonic SC-BT222 User Manual - Dutch - 96 pages

Panasonic SC-BT222 User Manual - Danish - 96 pages

Panasonic SC-BT222 User Manual - Italian - 96 pages

Panasonic SC-BT222 User Manual - Swedish - 96 pages

Panasonic SC-BT222 User Manual - Turkish - 52 pages

Panasonic SC-BT222 User Manual - Spanish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info