533956
26
Zoom out
Zoom in
Previous page
1/48
Next page
26
VQT2S28
Linked operations with
the TV
(VIERA Link “HDAVI Control
TM
”)
Preparation
1 Set “VIERA Link” to “On” (> 34).
(The default setting is “On”.)
2 Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so that
the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.
Setting the audio link with the TV
With the remote control;
Select the actual TV audio connection on the main unit.
1 Press [START] and press [3, 4] to select “To Others” and
press [OK].
2 Press [3, 4] to select “Setup” and press [OK].
3 Press [3, 4] to select “TV / Device Connection” and press
[OK].
4 Press [3, 4] to select “TV Audio Input”.
5 Press [2, 1] to switch “AUX”, “ARC” or “DIGITAL IN 1”.
Whenever the connection or settings are changed, reconfirm
the points above.
Setting the audio link with the STB
With the remote control;
Select the STB input channel on the TV.
1 Press [EXT-IN] to select “D-IN 2”.
2 Press [STATUS] to select “CABLE/SAT AUDIO ON”.
If the input channel of the STB on the TV is changed or if you
want to change the device allocated for the linked
operations, select “CABLE/SAT AUDIO OFF” in step 2
above and then repeat steps 1 to 2.
VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009)
for Panasonic’s HDAVI Control compatible equipment. This standard is
compatible with Panasonic’s conventional HDAVI equipment.
Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
You can turn on this unit and the TV, and start play with a
single press of a button.
While the unit and the TV are in standby mode;
Press [1 PLAY].
You can select whether audio is output from the unit’s
speakers or the TV speakers by using the TV menu settings.
Home Cinema
This unit’s speakers are active.
When this unit is in standby mode, changing the TV
speakers to this unit’s speakers in the TV menu will
automatically turn the unit on and select, “AUX”
*1
, “ARC”
*1
or
“D-IN 1” (DIGITAL IN 1)
*1
as the source.
You can control the volume setting using the volume or mute
button on the TV’s remote control.
If you turn off this unit, TV speakers will be automatically
activated.
TV
TV speakers are active.
The volume of this unit is set to “0”.
Audio output is 2-channel audio.
When switching between this unit’s speakers and TV speakers, the TV
screen may be blank for several seconds.
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) under “HDAVI Control”.
You can use this function by connecting the equipment
with an HDMI cable. See the operating instructions for
connected equipment for operational details.
Setting the audio link
One touch play
Speaker Selection
SCBT222EBEG_VQT2S28-B.book 26 ページ 2010年2月12日 金曜日 午後1時4分
26


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-sc-bt222

Reset search

  • bonjour sabt-222 home salon en panne avec arc
    merci
    stcalain@orange .fr Submitted on 27-2-2022 at 14:03

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BT222 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BT222 in the language / languages: English as an attachment in your email.

The manual is 6,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-BT222

Panasonic SC-BT222 User Manual - German - 96 pages

Panasonic SC-BT222 User Manual - Dutch - 96 pages

Panasonic SC-BT222 User Manual - Danish - 96 pages

Panasonic SC-BT222 User Manual - Italian - 96 pages

Panasonic SC-BT222 User Manual - Swedish - 96 pages

Panasonic SC-BT222 User Manual - Turkish - 52 pages

Panasonic SC-BT222 User Manual - Spanish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info