61553
40
Zoom out
Zoom in
Previous page
1/48
Next page
40
RQT9161
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions
indicated in the chart do not solve the problem, consult your dealer for instructions.
The following do not indicate a problem with this unit:
Regular disc rotating sounds.
Image disturbance during search.
To reset this unit Page
Power
Operation
Displays
TV screen and video
To restore the unit if it freezes
due to one of the safety
devices being activated
Press and hold [Í/I] on this unit for 10 seconds. (The settings remain unchanged.)
To return all settings other
than some settings to the
factory preset
Select “Yes” in “Default Settings” in the Setup menu.
This returns all values in the Setup menu and the on-screen menu, except for
“Remote Control”, “On-screen Language”, “DVD-Video Ratings”, “BD-Video
Ratings” and “Speaker” to the default settings.
34
To return to the factory
preset
Reset the unit as follows:
1 Press [Í/I] on the unit to turn off the unit.
2 Press and hold [9/5], [] (Stop) and [< OPEN/CLOSE] on the unit at the
same time for more than 5 seconds until “PLEASE WAIT” is displayed on the unit.
3 The power is turned off automatically.
No power. Insert the AC mains lead securely into a known active household mains socket. 9
The unit switches to
standby mode.
When the time set for the sleep timer has passed, the unit will be turned off.
One of the unit’s safety devices is activated. Press [
Í
/I] on this unit to turn the unit on.
18
The remote control doesn’t
work properly.
The remote control and this unit are using different
codes. Change the code on the remote control.
Press and hold [OK] and the indicated number
button at the same time for more than 5 seconds.
The batteries are depleted. Replace them with new ones.
You are not pointing the remote control at this unit’s remote control signal sensor
during operation.
Coloured glass may obstruct the signal reception/transmission.
Do not place the signal sensor in direct sunlight or in areas that may be subject to
sunlight exposure.
It may be necessary to set the code on the remote control again after changing the batteries.
42
10
10
42
The unit is on but cannot be
operated.
Confirm the correct source is selected.
Some operations may be prohibited by the disc.
The unit is hot (“U59” appears on the display). Wait for “U59” to disappear.
One of the unit’s safety devices may have been activated. Reset the unit as follows:
1 Press [Í/I] on this unit to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [Í/I] on this unit for about 10
seconds. Alternatively, disconnect the AC mains lead, wait one minute, then
reconnect it.
2 Press [Í/I] on this unit to switch it on. If the unit still cannot be operated, consult
the dealer.
Condensation has formed: Wait 1 to 2 hours for it to evaporate.
12
39
Play fails to start even when
[1 PLAY] is pressed.
Play starts but then stops
immediately.
Insert the disc correctly with the label facing up.
The disc is dirty.
You tried to play a blank disc or unplayable disc on this unit.
The producers of the disc can control how discs are played. So you may not always
be able to control play as described in these operating instructions. Read the disc’s
instructions carefully.
[DivX[ If playing DivX VOD content, refer to the homepage where you purchased it.
16
15
14, 15
15
Cannot eject disc. The unit may have a problem. While the unit is off, press and hold [:/6] and
[< OPEN/CLOSE] on this unit at the same time for about 5 seconds. Remove the
disc and consult the dealer.
Startup is slow.
When the unit is turned on, audio
and video output takes a long time.
It takes time before play starts.
Startup takes time in the following situations.
Immediately after a power failure or the AC mains lead is connected.
When the unit is connected with an HDMI cable.
[DivX[ This is normal on DivX video.
Cannot set “On” in
“BD-Video 24p Output”.
Only when the unit is connected to the HDMI terminal of a TV supporting 24p you
can select “On”.
36
The display is dim. Change “FL Display” in the Setup menu. 35
The elapsed time displayed
is actually less than the
playtime.
The displayed play time is converted from the number of frames at 29.97 frames
(equal to 0.999 seconds) to one second. There will be a slight difference between
the time displayed and the actual elapsed time (e.g., actual one-hour elapsed time
may display as approximately 59 minutes 56 seconds).
Picture stops. [DivX[ Picture may stop if the DivX file are greater than 2 GB.
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
Use the TV to change the aspect. Refer to your TV’s operating instructions.
When using an HDMI cable, set “TV Aspect” to “16:9”.
When using a component video cable, set “Progressive” to “Off”. If the situation is
not restored after that, set “TV Aspect” to “4:3 Pan & Scan”.
36
33, 36
D
R
e.g., Display
SC-BT100P-ENG-Body4_mst.fm Page 40 Friday, April 11, 2008 2:42 PM
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BT100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BT100 in the language / languages: English as an attachment in your email.

The manual is 8,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-BT100

Panasonic SC-BT100 User Manual - English - 7 pages

Panasonic SC-BT100 User Manual - German - 48 pages

Panasonic SC-BT100 User Manual - Dutch - 96 pages

Panasonic SC-BT100 User Manual - Danish - 96 pages

Panasonic SC-BT100 User Manual - French, Italian - 96 pages

Panasonic SC-BT100 User Manual - Polish - 96 pages

Panasonic SC-BT100 User Manual - Swedish - 96 pages

Panasonic SC-BT100 User Manual - Spanish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info