61553
5
Zoom out
Zoom in
Previous page
1/48
Next page
5
RQT9161
Notes on speaker use
Use only supplied speakers
Using other speakers can damage the unit, and sound
quality will be negatively affected.
You can damage your speakers and shorten their useful life if
you play sound at high levels over extended periods.
Reduce the volume in the following cases to avoid damage:
When playing distorted sound.
When the speakers are reverberating due to a record
player, noise from FM broadcasts, or continuous signals
from an oscillator, test disc, or electronic instrument.
When adjusting the sound quality.
When turning the unit on or off.
If irregular colouring occurs on your TV
The front and centre speakers are designed to be used close to
a TV, but the picture may be affected with some TVs and setup
combinations.
If this occurs, turn the TV off for about 30 minutes.
The demagnetizing function of the TV should correct the
problem. If it persists, move the speakers further away from
the TV.
Caution
Do not touch the front netted area of the speakers. Hold by the
sides.
e.g., Centre speaker
You can attach all of the speakers (except subwoofer) to a wall.
The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg per screw. Consult a
qualified building contractor when attaching the speakers to
a wall. Improper attachment may result in damage to the wall
and speakers.
1 Detach stand (Front speakers).
2 Drive a screw (not included) into the wall.
Centre/Front speaker
Ensure that the screw is positioned at least 70 mm away
from the ceiling.
Centre speaker
Ensure that the screw is positioned at least 100 mm
away from the wall.
Fixing the position for the centre speaker screws.
1 Drive in a screw 50.5 mm
left of the right side of the
centre speaker as seen
directly from the front.
2 Drive another screw
160 mm left of the first
screw.
3 Fit the speaker securely onto the screw(s) with
the hole(s).
(Except subwoofer)
Ensure the stands meet these conditions before purchasing
them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
The stands must be able to support over 10 kg.
The stands must be stable even if the speakers are in a high
position.
e.g., Centre speaker
You will need to obtain the appropriate screw eyes to match
the walls and pillars to which they are going to be fastened.
Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
Do
Do not
Speaker installation options
Attaching to a wall
Remove the
3 screws
7.5 mm to 9.4 mm
7.0 mm to 9.4 mm
Wall or pillar
4.0 mm
At least 30 mm
Front speaker
Centre speaker
Fitting speaker stands (not included)
Prevent the speakers from falling
In this position,
the speaker will
likely fall if moved
to the left or right.
Move the speaker
so that the screw
is in this position.
Do
Do not
e.g.,
5.0 mm, pitch 0.8 mm
60 mm
Plate thickness plus
7 mm to 10 mm
Metal screw holes
For attaching to
speaker stands
Speaker stand
(not included)
String (not included)
Thread from the wall to the
speaker and tie tightly.
Approx.
150 mm
Rear of the speaker
Wall
Screw eye
(not included)
e.g., Front speaker
Getting started
Quick Start Guide
SCBT100EGEB-RQT9161-B.book Page 5 Thursday, April 10, 2008 3:57 PM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-BT100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-BT100 in the language / languages: English as an attachment in your email.

The manual is 8,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-BT100

Panasonic SC-BT100 User Manual - English - 7 pages

Panasonic SC-BT100 User Manual - German - 48 pages

Panasonic SC-BT100 User Manual - Dutch - 96 pages

Panasonic SC-BT100 User Manual - Danish - 96 pages

Panasonic SC-BT100 User Manual - French, Italian - 96 pages

Panasonic SC-BT100 User Manual - Polish - 96 pages

Panasonic SC-BT100 User Manual - Swedish - 96 pages

Panasonic SC-BT100 User Manual - Spanish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info