63707
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
RQT8043
RQTV0279
ESPAÑOLESPAÑOLESPAÑOLESPAÑOLESPAÑOL
The buttons described for “Cassette tape – Play and record”
are mainly using the main unit unless indicated otherwise.
Basic playBasic play
Use normal position tapes.
High position and metal position tapes can be played, but the unit
will not be able to identify the characteristics of these tapes.
1 Press [3, TAPE].
The unit turns on.
If a cassette was loaded, play starts automatically (One touch
play).
2 Press [0, OPEN] and insert the cassette.
Insert with the side to be played facing towards you and the
exposed tape facing down. Close the holder by hand.
3 Press [3, TAPE] to start play.
To Action
Stop tape playback
Press [-7 STOP, –DEMO].
Fast-forward and
rewind
Press [4 / REW / 4] or [3 / FF / ¢ ] in the
stop mode.
Note:
Tapes exceeding 100 minutes are thin and can break or get
caught in the mechanism.
Tape slack can get caught up in the mechanism and should be
wound up before the tape is played.
TPS (Tape Program Sensor)
This function enables you to search the beginning of up to a
maximum of 9 tracks.
Press [
4 / REW / 4] or [ 3 / FF / ¢] during play.
Play resumes from the track found.
Note:
TPS may not operate correctly in the following situations:
If the interval between tracks is less than 4 seconds.
If there is noise between tracks.
If there are silent parts within tracks.
RecordingRecording
Selection of tapes for recording
Use normal position tapes.
High position and metal position tapes can be used, but this unit
will not be able to record or erase them correctly.
Preparation
Wind up the source tape so recording can begin immediately.
1 Press [0 , OPEN] and insert the cassette to be recorded.
Insert with the side to be recorded facing towards you and the
exposed tape facing down.
2 Select the source to be recorded.
Radio recording:
Tune in the station. (\ page 13)
Disc recording:
Insert the disc(s) you want to record.
Press [6, CD] and then [-7 STOP, –DEMO].
Prepare the desired disc recording mode.
To Action
Record
programmed
tracks
Perform steps 2 to 4 in “Program play
(\ page 10).
Perform steps 3 to 6 in “Program play
(\ page 10).
By remote control only
Record
specifi c discs
or tracks
1) Press [DISC] and then [1] ~ [5] to select
the disc.
Ensure disc is stopped.
2) Press [PLAY MODE] to select the desired
mode (\ page 9).
3)
For 1-ALBUM mode and 1-TRACK mode:
Press [ALBUM (
or )] to select the
album.
For 1-TRACK mode:
Press [4,
4 / REW] or [¢, 3 / FF] to
select the track.
3 Press [ REC, TAPE] to start recording.
Other basic operations
To Action
Stop recording
Press [-7 STOP, –DEMO].
Record on the other
side of the tape
Turn the cassette over and press
[ REC, TAPE].
Erase a recorded
sound
1) Press [ 3, TAPE] and then
[-7 STOP, –DEMO].
2) Insert the recorded cassette.
3) Press [ REC, TAPE].
Your attention is drawn to the fact that recording pre-recorded
tapes or discs or other published or broadcast material may
infringe copyright laws.
Note:
Changes to volume and sound quality do not affect recording.
Erasure prevention
The illustration shows how to remove the tabs to prevent recording.
To record on the tape again, cover as shown.
Side A
Tab for side ATab for side B
To re-record
Normal cassette
Adhesive tape
Cassette tape – Play and record
RQTV0279-2B.indd 12RQTV0279-2B.indd 12 4/3/08 10:55:08 AM4/3/08 10:55:08 AM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-AK270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-AK270 in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-AK270

Panasonic SC-AK270 User Manual - German - 56 pages

Panasonic SC-AK270 User Manual - Dutch, Danish - 56 pages

Panasonic SC-AK270 User Manual - French, Italian - 56 pages

Panasonic SC-AK270 User Manual - Polish - 56 pages

Panasonic SC-AK270 User Manual - Swedish - 56 pages

Panasonic SC-AK270 User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info