159957
14
Zoom out
Zoom in
Previous page
1/20
Next page
14
RQT8043
RQTV0196
LANG - 5 LANG - 4 FRANÇAIS DANSK ESPAÑOL
Setting the clockSetting the clock
This is a 24-hour clock.
1
Press [CLOCK / TIMER] to select “CLOCK”.
Each time you press the button:
CLOCK
˚ PLAY
Original display
˚ REC
2
(
Within 8 seconds or so
)
Press [4, / REW] or [¢ , / FF] to set the time.
3
Press [CLOCK / TIMER] to finish setting the time.
Displaying the clock
Press [CLOCK
/
TIMER] once when the unit is on or in standby
mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the play or record timerUsing the play or record timer
You can set the timer to come on at a certain time to wake
you up (play timer) or to record from the radio or the external
equipment (record timer).
Play timer and record timer cannot be used together.
Turn the unit on and set the clock.
Timer Action
Play timer Prepare the music source you want to listen to;
cassette, disc number (1 ~ 5), radio or other
external equipments, and set the volume.
Record
timer
Check the cassette’s erasure prevention tabs
(
\ page 12), insert the cassette and tune to the
radio station (
\ page 13) or select the external
equipment (
\ page 15 ~ 16).
1
Press [CLOCK/TIMER] to select the timer function.
Each time you press the button:
CLOCK
˚ PLAY
Original display
˚ REC
˚PLAY : to set the play timer
˚REC : to set the record timer
(Proceed to the next step
within 8 seconds
)
2
Press [4, / REW ] or [¢ , / FF] to set the
starting time.
Play timer indicator
Start time
Record timer indicator
1
3
Press [CLOCK / TIMER] to confirm.
4
Repeat steps 2 to 3 to set the finishing time.
1
Finish time
To activate the timer
5
Press [ ˚PLAY/REC] repeatedly to turn on your desired
timer.
˚ PLAY
no display (off)
˚ REC
6
Press [y] to turn off the unit.
The unit must be off for the timers to operate.
Other basic operationsOther basic operations
To Action
change the
settings
Repeat steps 1 to 4 and 6 (
\ see left and
above).
change the
source or
volume
1) Press [ ˚PLAY/REC] to clear the timer
indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 to 6 (
\ see above).
check the
settings
Press [CLOCK/TIMER] repeatedly to select
˚PLAY or ˚REC.
cancel Press [ ˚PLAY/REC] to clear the timer
indicators from the display.
If you use the unit after the timers are set
After using, check that the correct tape/disc are loaded
before turning the unit off.
Note:
The play timer will start at the preset time with volume increasing
gradually to preset level.
The record timer will start 30 seconds before the set time with the
volume muted.
The timer comes on at the set time every day if the timer is on.
The unit must be in the standby mode for the timer to function.
If you turn the unit off and on again while a timer is functioning,
the fi nish time setting will not be activated.
If MUSIC PORT is selected as the source when the timer comes
on, the system turns on and engages MUSIC PORT as the
source. If you wish to playback or record from the portable audio
equipment, just activate the equipment’s play mode and increase
the volume. (See the portable audio equipment’s instruction
manual.)
Using the sleep timerUsing the sleep timer
This function enables you to turn off the unit automatically
after the set time.
Press [SLEEP] to select your desired time.
SLEEP 30 SLEEP 60 SLEEP 90
SLEEP OFF SLEEP 120
Sleep timer indicator
To cancel
Press [SLEEP] to select “SLEEP OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time and press
[SLEEP] again to select your desired time.
Note:
The play and sleep timer or the record and sleep timer can be
used together.
The sleep timer always has priority. Be sure not to overlap timer
settings.
The sleep timer turns off when you perform the record function.
Timer
RQTV0196-B.indd 14RQTV0196-B.indd 14 2/23/07 4:49:32 PM2/23/07 4:49:32 PM
14


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-sc-ak-350

Reset search

  • Hello,
    A quick question: I would like to record from cassette and CD to pendrive? Is it possible and how to proceed.
    Many thanks and best regards.
    Eric Submitted on 10-5-2022 at 13:34

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic sc ak 350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic sc ak 350 in the language / languages: English as an attachment in your email.

The manual is 4,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic sc ak 350

Panasonic sc ak 350 User Manual - English - 20 pages

Panasonic sc ak 350 User Manual - German - 56 pages

Panasonic sc ak 350 User Manual - Dutch, Danish - 56 pages

Panasonic sc ak 350 User Manual - French, Italian - 56 pages

Panasonic sc ak 350 User Manual - Polish - 56 pages

Panasonic sc ak 350 User Manual - Swedish - 56 pages

Panasonic sc ak 350 User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info