608312
8
Zoom out
Zoom in
Previous page
1/16
Next page
RQT8572
8
Do not apply an unreasonable force to the net at the front of the
speaker unit. You cannot remove the front net.
You can carry out assembly work stably by placing the cushions in
the packing case beneath each speaker. Place the speaker with the
net side face downward. ( page 6)
Be sure to spread a cloth, for example, on the floor to protect it from
damage.
After each task, tighten the screws securely.
Tighten the height adjusting bolts using the hexagonal wrench
provided.
Keep the removed parts carefully aside.
1.Connect the speaker cable (provided) to the ter-
minals .
Refer to step 3 on page 6.
Speaker cable (short, 4 m): For the front speaker
Speaker cable (long, 10 m): For the surround speaker
2.Remove the upper and lower covers from the back
of the speaker unit, and remove the two stopper
screws from the lower cover.
Unless wall-mounting the speaker, do not remove the stopper
screws. These screws determine the minimum height of the
speaker unit.
3.Fit the stand onto the speaker unit, and fix it in
place.
Loosen the two height adjusting bolts .
Push the stand to the rear of the bottom part of the speaker
unit.
Tighten the two height adjusting bolts .
Tighten the screws alternately and finally tighten them hard.
Assembly and Installation
Wall-mounting the front and surround speakers (SB-FS100)
4.Fit the bottom cover (provided) into the lower end
of the speaker unit.
Bring the cable out from the side of the bottom cover, and
then insert the bottom cover.
Fit the bottom cover into the speaker unit.
5.Apply the spacers (provided), and mount the
speaker on the wall.
Apply the spacers to the two points beneath the cover as shown
in the illustration.
When the screws are in this position, the speaker may drop off.
Fit the speaker securely so the screws are in this position.
Screw (not included)
Screw the wood screw into a thick and hard part of the wall.
The surface must be able to support over 25 kg (55 lb.).
Assembling a wall-mounted speaker system as a stand
type
Return the speaker to the original condition by carrying out
the opposite procedure to the above.
Insert the stopper screws of step 2 above into the holes in the
speaker unit.
Assemble the speaker as a stand type. ( page 6)
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SBTP100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SBTP100 in the language / languages: English, French as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SBTP100

Panasonic SBTP100 User Manual - English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info