612599
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
Operations
RQT7487
Control guide
When you turn the dimmer to “ON”, the following indicators change to dim.
Main unit
Standby indicator [^]
When the unit is connected to the
AC mains supply, this indicator
lights up in standby mode and
goes out when the unit is turned
on.
[POWER 8]
Press to switch the unit from on to
standby mode or vice versa. In
standby mode, the unit is still
consuming a small amount of
power.
[SPEAKERS, A, B]
For selecting speakers A
or B.
Turning the speakers off
automatically engages the
STEREO/2CH mode
(when listening through
headphones, for example).
[% DIGITAL EX, % DIGITAL, % PL ,
DTS 96/24, DTS-ES, DTS, DTS NEO:6]
Lights to indicate the source’s input signal and
decoding format used.
% DIGITAL EX: Dolby Digital Surround EX sources
% DIGITAL: Dolby Digital sources
% PL : Dolby Pro Logic decoder is being used
DTS 96/24: DTS 96/24 sources
DTS-ES: DTS-ES discrete or matrix sources
DTS: DTS sources
DTS NEO:6: DTS NEO:6 matrix decoder is being
used
[MULTI CONTROL]
Press to enter Multi control
mode, and use [INPUT
SELECTOR] to select/
enter.
[INPUT SELECTOR]
For selecting input.
Selects/Enters each setting
in Multi control mode.
[VOLUME]
Volume control.
[VCR 2]
For a video camera, etc.
[6.1CH DECODING]
For turning on the 6.1 channel decoding mode. When using this mode the
indicator lights.
[BASS SYNTHESIZER]
For turning on the bass synthesizer mode. When using this mode the indicator
lights.
[MULTI-SOURCE RE-MASTER]
For selecting a re-master mode. When using this mode the indicator lights.
[TUNE 2, 1]
For tuning the radio and selecting preset stations.
Press and hold until the frequency starts scrolling to start automatic tuning. Tuning
stops when a station is found.
[PHONES]
Headphone jack
Plug type: 6.3 mm (1/4")
stereo
Avoid listening for
prolonged periods of
time to prevent hearing
damage.
Turn the speakers off
when using the
headphones.
Display
[– SPEAKERS– , ]
Speaker indicators
:Sound is output from
speakers connected to
the front A, surround, and
center terminals.
: Sound is output only from
speakers connected to
the front B terminals.
:Sound is output from
speakers connected
to the front A and B
terminals.
[TUNED, ST, , MONO]
Radio indicators
TUNED: A station is tuned.
ST: A stereo FM broadcast is
tuned.
: Flashes during automatic
presetting.
MONO: Lights when using the
monaural mode.
[SLEEP]
Sleep timer indicator.
[SFC, CENTER FOCUS, 2CH MIX,
MULTI REAR]
SFC: Lights when using an SFC mode.
CENTER FOCUS: Lights when using the
center focus mode.
2CH MIX: Lights when playing a multi-
channel source in 2CH MIX
mode.
MULTI REAR:
Lights when using the multi
rear surround mode.
[<<<MULTI CONTROL>>>]
When you press the [MULTI CONTROL]
button and enter the settings the indicator
lights.
[DIGITAL INPUT, L, C, R, S,
LS, SB, RS, LFE]
Program format indicators
Show the channels contained in the
digital input signal. They do not light
when input is analog.
L: Front left channel
C: Center channel
R: Front right channel
S: If the surround channel is
monaural.
LS: Surround left channel
SB: Surround back channel
RS: Surround right channel
LFE (Low Frequency Effects):
Deep-bass effect.
[TAPE MONITOR]
Lights when the tape monitor
is on.
[DIGITAL PROCESSING fs]
Displays the frequency the unit is
processing.
General display
Shows the input mode, radio
frequency, and other general
information.
[kHz, MHz]
Frequency unit indicators
kHz:
AM, or PCM sampling frequency
MHz: FM
SPEAKERS
AB
POWER
8
6.1CH DECODING
VIDEO IN
AUDIO INLR
VCR 2
PHONES
^
MULTI CONTROL
INPUT SELECTOR
VOLUM E
DOWN UP
PUSH ENTER
Remote control
signal sensor
SPEAKERS
TUNED
ST
M
SFC
CENTER
FOCUS
DIGITAL
INPUT
AB
MONO
SLEEP
2CH
MIX
MULTI
REAR
L C R S
TAPE
MONITOR
MULTI
CONTROL
LS SB RS
LFE
DIGITAL
PROCESSING
fs
kHz
MHz
kHz
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SAXR50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SAXR50 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SAXR50

Panasonic SAXR50 User Manual - English - 32 pages

Panasonic SAXR50 User Manual - English - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info