612598
14
Zoom out
Zoom in
Previous page
1/24
Next page
Using NEO:6
14
RQT6840
Switch on.
Select input.
Start play of the
source.
The unit sets the sound mode to suit
the input signal.
Adjust the
volume.
1
2
3
4
INPUT SELECTOR
POWER
8
DOWN UP
VOLUME
POWER
8
DTSDTS-ES NEO:6
FM MODE
INPUT SELECTOR
MEMORY
VOLUME
PHONES
DOWN UP
PRESET
TUNE 2 TUNE 1
%
DIGITAL
%
DIGITAL EX
%
PL2
^
DTS 96/24
POWER
8
INPUT SELECTOR
DOWN UP
VOLUME
BAND
MULTI-SOURCE
DIGITAL RE-MASTER
ENHANCED
SURROUND
ENHANCED
SURROUND
Basic operations
Step
1 2 3
4
Step 4
INPUT MODE
STEREO/
2CH MIX
DOLBY
PRO LOGIC
NEO:6 SFC
SLEEP
TONE/
BALANCE
LEVEL EFFECT
/L
+
/R
ENTER
NAVIGATOR
DISPLAY
DIMMER
SUBWOOFER
MUTINGTV/VIDEO
RETURN
LIST
-TEST/SETUP
STEREO/
2CH MIX
DOLBY
PRO LOGIC2
SFC
LEVEL EFFECT
/L
+
/R
INPUT MODE
NEO:6
When you finish listening
Be sure to reduce the volume and press [POWER 8] to switch the unit
to standby.
Notes on digital input
This unit can decode the following signals:
¡¡
Dolby Digital, including Dolby Digital Surround EX
¡¡
DTS, including DTS-ES or DTS 96/24 (SA-XR45)
¡¡
PCM, including PCM with sampling frequencies of 192, 176.4
(SA-XR45, OPTICAL2), 96 or 88.2 kHz
It cannot decode:
¡ Other digital signals, such as MPEG
¡ Dolby Digital RF signals from a laser disc player
TUNER / CD / TV / DVD
TAPE
, VCR ,
,
Sound modes
The unit sets the sound mode to suit the signal.
Adding surround effects to stereo sources
Dolby Pro Logic 2 processor works not only on sources recorded
with Dolby Surround, but also on any stereo source.
The following modes are available when using Dolby Pro
Logic
2.
Using Dolby Pro Logic
22
Listening to multi-channel sources in stereo
STEREO/
2CH MIX
When surround sources are played in this mode, the
sounds intended for the other speaker channels are
played through the front speakers.
The 2CH MIX mode remains in effect until you change input mode
or turn off the unit.
¡¡
To return to surround sound
Press [STEREO/2CH MIX].
Notes on sound modes
When input is Dolby Digital or DTS:
¡¡
You cannot use SFC.
When input is PCM with sampling frequencies of 192, 176.4 (SA-XR45,
OPTICAL2
), 96, or 88.2 kHz:
¡¡
You cannot add surround effects with Dolby Pro Logic 2, NEO:6 or
SFC.
When you have selected NONE for both the center and surround
speakers:
¡¡
You cannot use Dolby Pro Logic 2, NEO:6, or SFC.
DOLBY
PRO LOGIC2
Enjoy an enhanced sound experience with greater presence and
spread by using these SFC modes with PCM or analog
stereo sources.
Choose from the following modes.
Using the Sound Field Control (SFC)
Dolby Pro Logic 2, NEO:6 and SFC modes remain in effect until
you change them.
¡¡
To return to stereo sound
Press [STEREO/2CH MIX].
SFC
ENHANCED SURROUND mode
This mode uses the surround back speaker to create a
realistic sound field. It is especially effective when playing
DTS-ES and Dolby Digital Surround EX, but can be used
with other DTS and Dolby Digital sources, as well as
Dolby Pro Logic
2 and NEO:6. This mode engages automatically if
the disc has a recognition signal for DTS-ES or Dolby Digital
Surround EX (you can still turn the mode off).
ENHANCED
SURROUND
Use NEO:6 to play 2-channel sources through multi-channels.
The following modes are available when playing 2-channel
sources.
NEO:6
SA-XR25
SA-XR45
TUNER / CD / TV / DVD
TAPE , DVR/VCR
,
,
If the unit does not automatically recognize Dolby Digital
Surround EX or DTS-ES and output is 5.1 channels:
¡¡
Press [ENHANCED SURROUND] to switch the mode on manually.
Sound will now come from the surround back speaker.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SAXR45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SAXR45 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SAXR45

Panasonic SAXR45 User Manual - English - 3 pages

Panasonic SAXR45 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info