15
RQT6847
11
Tune to “FM 87.9 MHz”.
22
Press and hold [MEMORY].
The FM stations the unit can receive are preset in channels 1 to 30.
33
Tune to “AM 530 kHz”.
44
Press and hold [MEMORY].
The AM stations the unit can receive are preset in channels 21 to 30.
(FM stations are replaced if any were preset in these channels.)
During automatic presetting, the memory indicator (˜) flashes and the
frequency scrolls. The memory indicator and channel numbers are
displayed for a second when a station is preset.
The last station to be preset is displayed when presetting finishes.
11
Press [PRESET].
The channel number flashes for about 5 seconds.
22
Press [TUNING 2 or 1].
Hold down the buttons to change channels faster.
On the remote control
Press [CH 2 or 1].
or
Press the numbered buttons.
For channels 1 to 9, press the corresponding number.
For channels 10 or over, press [
>
=
10/ENTER], then the two digits.
e.g. To select channel 21: [
>
=
10/ENTER] / [2] / [1]
For your reference
Even if the power supply cord is disconnected from the household AC
outlet, the stations remain in memory for approximately one month.
The radio
Automatic presetting
Manual presetting
Selecting channels
Preset the stations one at a time.
11
Tune to the station.
22
Press [MEMORY].
33
Press [TUNING 2 or 1] to select a channel.
44
Press [MEMORY].
Manual tuning
Direct tuning
You can tune radio stations manually by selecting the station’s
frequency.
11
Turn [INPUT SELECTOR] to select “TUNER”.
22
Press [-BAND, –FM MODE] to select “FM” or “AM”.
33
Press [TUNING 2 or 1] to select the frequency.
Tuning intervals: FM – 0.2 MHz
AM – 10 kHz
11
Press [TUNER/BAND] to select “FM” or “AM”.
22
Press [DIRECT TUNING/DISC ENTER].
33
Press the numbered buttons to enter the frequency.
e.g. To select 107.9 MHz, press [1] / [0] / [7] / [9]
Tuning intervals: FM – 0.1 MHz
AM – 10 kHz
¡ If you do not press a button while the cursor is flashing, the
display returns to the frequency being received.
¡ If the frequency has not been input correctly, “ERROR” will be
displayed.
