502462
37
Zoom out
Zoom in
Previous page
1/52
Next page
37
RQT8739
See page 34 for receiver operations.
Changing the digital
input settings
• Change these settings to
suit the connections you
have made to the digital
input terminals.
• You can only allocate one
piece of equipment per
terminal.
Example: “OPT 1 ” becomes
the only digital terminal you
can use for connecting the
DVD player to the unit when
you change the DVD setting
to the terminal.
1 Select and confirm the choice.
2 Select the equipment connected to the digital
input terminal and confirm the choice.
3 Change the digital input setting and confirm the
choice.
Repeat steps 2 and 3 to change settings.
TV :TV
DVR : DVD recorder
DVD :DVD player
CD : CD player
Factory setting:
TV ; OPT1 (OPTICAL1)
DVR ; OPT2 (OPTICAL2)
DVD ; COAX1 (COAXIAL1)
CD ; COAX2 (COAXIAL2)
Setting input signals
• You can fix the signal type
(digital, analog or PCM)
supplied by such equipment
as the DVD recorder and the
DVD player or make the unit
identify the input signal
type.
•SelectAUTO ” when it is
not necessary to fix the
signal.
1 Select and confirm the choice.
2 Select the equipment connected to the digital
input terminal and confirm the choice.
3 Select the method for identifying input signals
and confirm the choice.
Repeat steps 2 and 3 to change settings.
PCM FIX mode
In rare cases, the unit may have trouble recognizing the digital
signals on discs.
• Use this mode when, for example, the beginning of a playing CD
track is cut off.
• You do not need to set the mode when playback is normal.
When PCM FIX mode is on, the unit cannot process other signals.
Cancel the mode when noise occurs.
TV :TV
DVR : DVD recorder
DVD :DVD player
CD : CD player
AUTO :
Automatic identification of digital
and analog signals (HDMI takes
priority when the input signal is
digital.)
ANALOG :
Fixes the input signal to analog.
DIG :
Fixes the input signal to digital.
PCMFIX :
Fixes the input signal to PCM.
Factory setting:
TV, DVR ,DVD, CD ; AUTO
•“DIGITAL INPUT” stays on the display when you fix the input signal as digital.
•“PCM” appears on the display when you set the input signal as “PCMFIX ”.
•“PCM FIX ” flashes on the display when the unit is in the PCM FIX mode and a non-PCM source
is input through digital (OPTICAL or COAXIAL) connections.
Reducing standby
power consumption
(power saving standby
mode)
1 Select and confirm the choice.
2 Select and confirm the choice.
3 Select and confirm the choice.
OFF :
When you wish to reduce
standby power consumption
ON :
When you activate the standby
through function (standby power
consumption becomes 0.7 W in
this setting)
Factory setting: ON
When you select “OFF ”, the following becomes applicable.
• Standby power consumption becomes 0.3 W.
• Standby through with HDMI connections (á page 7) does not work.
• Ez Sync HDAVI Control (á page 13) is canceled (when the unit is off).
Setting the unit against
Ez Sync HDAVI Control
• You can set the unit against
EZ Sync HDAVI Control
when compatible TV
(VIERA) and DVD recorder
(DIGA) are connected.
1 Select and confirm the choice.
2 Select and confirm the choice.
3 Select and confirm the choice.
OFF :
When not using EZ Sync HDAVI
Control
ON :
When using EZ Sync HDAVI
Control
Factory setting: ON
Note
Note
Settings
Operations
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SA-XR700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SA-XR700 in the language / languages: English as an attachment in your email.

The manual is 4,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SA-XR700

Panasonic SA-XR700 User Manual - English - 48 pages

Panasonic SA-XR700 User Manual - English - 48 pages

Panasonic SA-XR700 User Manual - English - 52 pages

Panasonic SA-XR700 User Manual - German - 144 pages

Panasonic SA-XR700 User Manual - Dutch, Danish - 144 pages

Panasonic SA-XR700 User Manual - French, Italian - 144 pages

Panasonic SA-XR700 User Manual - Polish - 144 pages

Panasonic SA-XR700 User Manual - Swedish - 144 pages

Panasonic SA-XR700 User Manual - Spanish - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info