502462
35
Zoom out
Zoom in
Previous page
1/52
Next page
35
RQT8739
Setting speakers and
their sizes
• You can set connected
speakers and their sizes
manually.
• Different ranges are played
by different speakers. Size
setting is necessary for
reproducing sources,
particularly their bass
section, completely.
1 Select and confirm the choice.
2 Select a speaker for setting and
confirm the choice.
3 Change a setting and confirm the
choice.
To go back to step 1
Select and confirm the choice.
When you set the front speakers (LR) as “LARGE
The subwoofer also makes audio output in the
bass range when you perform stereo playback
of analog and PCM sources.
The subwoofer sends out only the LFE (low
frequency effect channel) signal contained in
2-channel Dolby Digital or DTS sources when
you play them in stereo.
SUBW :Subwoofer
LR : Front speakers
C : Center speaker
S : Surround speakers
SB : Surround back speakers
SUBW : NO ; unconnected YES ; connected
LR, C, S :
NONE ;
For speakers you haven’t connected (center or
surround only).
SMALL ;
For speakers that cannot adequately
reproduce the bass range. This setting is
sufficient for most speakers if you are using a
subwoofer.
LARGE ;
For speakers that can sufficiently reproduce
the bass range down to 20 Hz.
SB :
NONE ;
For speakers you haven’t connected.
1-SPK ;
If you connect one surround back speaker.
2-SPK ;
If you connect two surround back speakers.
Factory settings: LR, C, S ; SMALL
SUBW ; YES
SB ; 2-SPK
Set the lowpass filter frequency according to frequencies available for playback when speakers
are set as “SMALL ”. The factory setting is 80 Hz. (below)
• The following are set automatically.
When you set “LR
” to “SMALL
”, “SUBW
” is set to “YES
”.
When you set “SUBW ” to “NO ”, “LR
” is set to “LARGE
”.
•TheSB
” size becomes the “S
” size because the unit does not offer “SB
” size setting.
• When you change the number of connected speakers, settings made with the setup microphone
are canceled. (á pages 24 and 25)
Setting distances
• By adjusting the distance
from each speaker (except
the subwoofer) to the
seating area, the sound
delay time is automatically
adjusted so that sound
reaches the listener at the
same time.
1 Select and confirm the choice.
2 Select a speaker for setting and
confirm the choice.
3 Select a distance and confirm the
choice.
L : Front left C : Center
R : Front right LS : Surround left
RS : Surround right
SBL : Surround back left
SBR : Surround back right
Adjustment range: 1.0 to 45.0 ft (feet)
This unit is adjusted at 0.5 feet intervals.
Factory settings: L, R ; 10.0 ft (feet)
C ; 10.0 ft (feet)
LS, RS ; 5.0 ft (feet)
SBL, SBR ; 5.0 ft (feet)
Speakers whose polarity was automatically adjusted through the auto speaker setup using the
setup microphone are displayed with “ ” such as “L 10.0 ”.
When the speaker distance measured through the auto speaker setup (á pages 24 and 25)
exceeds 45 feet (15 meters), the distance is displayed as “OVER ”.
Setting the lowpass
filter
• If the speaker sizes (above)
are set to “SMALL”, make
this setting.
The unit cannot reproduce the
entire bass range when speakers
are set as “SMALL ”. You can
arrange the unit to provide missing
bass sounds through the
subwoofer by setting the lowpass
filter frequency according to
frequencies available for playback.
1 Select and confirm the choice.
2 Select the lowpass filter frequency
and confirm the choice.
Lowpass filter frequency for sending the bass
range to the subwoofer:
80, 100, 120, 140, 160, 180, 200 (Hz)
Factory setting: 80 (Hz)
The setting made through these steps applies to all speakers set as “SMALL
”.
Note
ft
ft
Note
Note
Settings
Operations
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SA-XR700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SA-XR700 in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SA-XR700

Panasonic SA-XR700 User Manual - English - 48 pages

Panasonic SA-XR700 User Manual - English - 52 pages

Panasonic SA-XR700 User Manual - English - 48 pages

Panasonic SA-XR700 User Manual - German - 144 pages

Panasonic SA-XR700 User Manual - Dutch, Danish - 144 pages

Panasonic SA-XR700 User Manual - French, Italian - 144 pages

Panasonic SA-XR700 User Manual - Polish - 144 pages

Panasonic SA-XR700 User Manual - Swedish - 144 pages

Panasonic SA-XR700 User Manual - Spanish - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info