502462
27
Zoom out
Zoom in
Previous page
1/52
Next page
27
RQT8739
SREAKERS B
Playback is in 2-channel stereo when you select “SPEAKERS B” only.
• When only “SPEAKERS B” is selected and the input source is
surround, “2CH MIX” appears on the display.
• Selected speakers output sounds assigned to front 2 channels
when you make DVD ANALOG 6CH connections.
If you select “SPEAKERS B” only, the following are set automatically irrespective of
settings selected in “Setting speakers and their sizes” (
á
page 35).
Speaker size: “LARGE
Subwoofer: “NO ” (Bass is output from the front speakers.)
Settings made through the auto speaker setup (á pages 24
and 25) are canceled.
MULTI ROOM
When you press [SPEAKERS A] or [SPEAKERS B],
consolidated 2-channel stereo sound is output from front and
surround speakers (in the original room).
MULTI ROOM is canceled when you press [SPEAKERS A] or [SPEAKERS B].
BI-AMP or ADVANCED DUAL AMP turns off when you
perform MULTI ROOM playback.
SPEAKERS ARE OFF
” is displayed when you press and hold [SPEAKERS
B] for 2 seconds without selecting “SPEAKERS A” and “SPEAKERS B”.
ADVANCED DUAL AMP (á page 39)
The unit takes advantage of unused amps, and runs one speaker with 2
amps when this function is on. ADVANCED DUAL AMP offers you
sounds that are clearer and higher in audio quality than those available
in normal playback. In 2-channel stereo playback, 3 speaker amps drive
front speakers. The operation is called the triple amp mode.
2-channel stereo playback: Front, surround and surround back
speaker amps are used for driving front speakers (triple amp mode).
5.1-channel playback: Front and surround back speaker amps
are used for driving front speakers (dual amp mode).
When surround speakers are connected wirelessly (
á
page 21), the
unit uses the wireless system amp for 5.1-channel playback. Under
the condition, front speakers are driven in the triple amp mode.
BI-AMP (á page 39)
The unit takes advantage of the front speaker and the surround
speaker amps, and drives the speakers’ high-frequency and low-
frequency ranges separately when this function is on.
ADVANCED DUAL AMP is available with BI-AMP. When combined, the
two functions enhance clarity and audio quality of stereo sounds.
When you make bi-wire setting (
á
page 20), both BI-AMP and
ADVANCED DUAL AMP take effect as long as overlap is possible. In
such case, ADVANCED DUAL AMP activates in the dual amp mode.
Select “
OFF
” in “Canceling BI-AMP (using the triple amp mode)”
(
á
page 36) when you wish to use the triple amp mode.
• You cannot use BI-AMP with analog 6-channel connections for
DVD-Audio sources.
Playing DVD-Audio
Make the following speaker settings on the DVD recorder or the
DVD player. (They are normal factory settings for the DVD
recorder and the DVD player.)
• Speaker size: “LARGE ” for all speakers
• Speaker presence: present for all speakers
• Distance setting: 0 or an equal distance for all speakers
Using
SPEAKERS B
Sound is output from the speakers connected to the FRONT B terminals on this unit.
Press to switch “ ” on.
To turn off speakers connected
to the FRONT A terminals
Switch “ ” on the display off by
pressing [SPEAKERS A].
MULTI ROOM
The wireless speaker unit outputs 2-channel stereo sound.
1 Press [SPEAKERS B] to switch “ ” on.
2 Press and hold [SPEAKERS B] for 2 seconds.
When the function is on, the “MULTI
ROOM” indicator lights on.
This function is not available while
muting is on.
ADVANCED
DUAL AMP
ADVANCED DUAL AMP activates automatically when you use 2-channel stereo playback or 5.1-channel playback.
The “ADVANCED DUAL AMP” indicator stays on while this function
is on.
• You can also set the ADVANCED
DUAL AMP off (á page 36).
BI-AMP
This function activates automatically when you play analog audio sources or 2-channel PCM signals through bi-wire connections.
• Connect bi-wire speakers
(
á
page 20).
•SelectYES ” in “Making bi-wire setting” (á page 20).
• Press [SURROUND] off (
á pages 12 and 26).
The “BI-AMP” indicator stays on while
BI-AMP is at work.
• Refer to “Making BI-AMP settings”
(á page 36) for detailed settings.
Playing
DVD-Audio
Enjoying DVD-Audio
sources through
digital connections
Connect the unit to a DVD recorder or DVD player using the HDMI cable (
á
page 7) or a
digital cable (COAXIAL1) (
á
pages 14 and 15).
Playing DVD
ANALOG 6CH
Make analog 6-channel connections (
á
page 18).
• Select “SPEAKERS A” or turn bi-wire
speakers on (á page 26).
Switch the input source to “
BD/DVD
” (
á
page 26).
Press and hold until
DVD 6CH ” is displayed.
When the unit is connected to a
DVD recorder
Playback is unavailable while the
input source is “DVR ”. Make
analog 6-channel connections and
switch the mode to “BD/DVD ”.
• To cancel, press and hold until
BD/DVD
” is displayed.
Enjoying high
quality 2-channel
analog sounds
You can enjoy high quality stereo sound with 192 kHz 2-channel DVD-Audio.
1 Cancel the “DVD 6CH ” setting. (above)
2 Set the input signal to “ANALOG ” in “Setting input signals”. (
á page 37)
B
SPEAKERS
B
B
SPEAKERS
A
B
BD/DVD
PLAYER
ANALOG 6CH
Note
Enjoying the Home Theater
Basic operations
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SA-XR700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SA-XR700 in the language / languages: English as an attachment in your email.

The manual is 5,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SA-XR700

Panasonic SA-XR700 User Manual - English - 48 pages

Panasonic SA-XR700 User Manual - English - 52 pages

Panasonic SA-XR700 User Manual - English - 48 pages

Panasonic SA-XR700 User Manual - German - 144 pages

Panasonic SA-XR700 User Manual - Dutch, Danish - 144 pages

Panasonic SA-XR700 User Manual - French, Italian - 144 pages

Panasonic SA-XR700 User Manual - Polish - 144 pages

Panasonic SA-XR700 User Manual - Swedish - 144 pages

Panasonic SA-XR700 User Manual - Spanish - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info