Manual Panasonic SA-XR58 (page 27 of 40) (English)

502459

Zoom out

Zoom in

1/40

ENGLISH

RQTV0156

Select and confirm.

Reset

Only necessary if you have set

speaker size to “SMALL”

(➡ above).

Small speakers are unable

to reproduce the bass range

adequately, so set the filter to

match the range of your speakers

so that more bass is output from the

subwoofer.

Only change this setting if auto

speaker setup has not produced a

satisfactory result.

•

Select and confirm.

Select the cut-off frequency and confirm.

The filter applies to any speakers you have set as “SMALL”.

Change this setting if you have

bi-wired your front speakers

(➡ page 13).

Select and confirm.

Factory setting: NO

Enter the distance of the

speakers from the seating

position so that the sound from

all the speakers (except for the

subwoofer) reaches you at the

same time.

Select and confirm.

Select the speaker you

want to set and confirm.

Select the distance

and confirm.

L, R: Front speakers C: Center speaker

LS, RS: Surround speakers SBL, SBR: Surround back

speakers

Adjustment range: 0.5 m to 15.0 m

Factory settings:

L, R (Front), C (Center) 3.0 m

LS, RS (Surround), SBL, SBR (Surround back) 1.5 m

Select and confirm.

Select the speaker you want to

set and confirm.

Change the setting and confirm.

Set the speakers and their

sizes.

Different speakers play different

ranges. Change the size setting

to achieve a satisfactory bass.

Only change this setting if

auto speaker setup has not

produced a satisfactory result.

•

When you have set the front speakers (LR)

as “LARGE”

The subwoofer outputs bass even when

you are playing analogue or PCM stereo

sources.

The sound recorded for the LFE (low

frequency effect) channel is played through

the subwoofer.

•

SUBW: Subwoofer

LR: Front speakers

C: Center speaker

S: Surround speakers

SB: Surround back speakers

SUBW (Subwoofer)

NO: Unconnected YES : Connected

(factory setting)

LR (Front), C (Center), S (Surround)

NONE: Speakers not connected (center or

surround)

SMALL : Speakers that cannot adequately

reproduce the bass range (sufficient for

most speakers when using a subwoofer)

(factory setting).

LARGE: Speakers that can reproduce a full

sound range, down to 20 Hz.

SB (Surround back)

NONE: Not connected

1-SPK: 1 connected

2-SPK : 2 connected (factory setting)

RETURN (Returns to the main menu)

The “SMALL” setting allows you to set the low

pass filter to suit the frequency range of your

speakers. (➡ below)

The following settings are automatic:

“SUBW” (subwoofer) is set to “YES” if you

set “LR” (front) to “SMALL”. “LR” is set to

“LARGE” if you set “SUBW” to “NO”.

“SB” (surround back) have the same size setting

as “S” (surround).

•

Speaker and size

settings

Distance

LR BI-WIRE setting

Low-pass filter

Factory setting: 100

Reset the settings done in auto

speaker setup.

Choose whether to check speaker

polarity during auto speaker setup.

(If polarity is reversed, a minus sign

(-) appears besides the distance

reading, for example, “L 3.0 -”

to show that polarity has been

corrected.)

•

Auto Setup

Select and confirm.

Receiver settings

Factory setting:

CHECK YES

The settings are 80 Hz, 100 Hz, 120 Hz,

140 Hz, 160 Hz, 180 Hz, and 200 Hz.

YES: You have bi-wired your front speakers

NO: You have not bi-wired your front speakers

Polarity

For your reference

YES: Reset all

auto speaker

setup settings

NO: To cancel

CHECK NO: Do

not check polarity

CHECK YES: To

check polarity

Note

“OVER” appears if a speaker was detected as being

more than 15.0 m away during auto speaker setup.

SA-XR58.indb 27 6/27/2006 6:55:22 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SA-XR58 in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SA-XR58

Panasonic SA-XR58 User Manual - German, French, Italian - 41 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic SA-XR58 Manual

Product: