502459
14
Zoom out
Zoom in
Previous page
1/40
Next page
ENGLISH
RQTV0156
14
Before playback
Before playback
Auto speaker setup
Auto speaker setup allows you to achieve a satisfactory listening environment easily with the use of the supplied calibration
microphone as a detector of sound signals. The unit will first perform automatic speaker detection, then checks and adjusts the
following settings.
2
Process for auto speaker setup
Connect the calibration microphone to the [SETUP
MIC] jack on the front panel.
The calibration microphone is sensitive to heat. Keep it away from direct
sunlight and do not place it on top of the unit.
Placing of calibration microphone.
Place on a flat surface at the seating area. Use a tripod for best results.
1
Note
Before setup
Conduct the auto speaker setup in a quiet environment. A noisy background will give unsatisfactory results.
Put the subwoofer in position, switch it on, and sets its volume to the level you would normally use. If you do auto speaker setup
without the subwoofer, the front speakers will be set as large, possibly resulting in an unsatisfactory bass.
Automatic speaker detection
(This can also be performed in
“Automatic speaker detection”,
page 17. However, for a
more optimized listening
environment, carry out the
setup here.)
Checks which speakers you have connected.
The factory setting is 7 speakers and a subwoofer.
Some types of speakers and cables may cause disruptions to the setup. In this case, conduct
manual setting, “Speaker and size settings”, page 27.
DISTANCE
Checks the distance of each speaker from the listening position and adjusts the timing of each
channel. For manual setup, “Distance”, page 27.
POLARITY
Checks the polarity of each speaker. You can choose not to have polarity checked, “Auto
setup”, page 27.
SIZE
Checks the speaker’s frequency response. For manual setup, “Speaker and size settings”,
page 27.
The front speakers are set to SMALL if the unit determines that they are different sizes.
FREQUENCY
Sets the appropriate low frequency crossover for each channel according to the speaker size.
For manual setup, “Low-pass filter”, page 27.
The setting is based on the speaker with the lowest bass reproduction range.
Also checks on “Level” setting to adjust the sound level (volume) for each speaker.
LEVEL
Makes any further corrections to the volume of each speaker (for manual setup, “Speaker output
and level” page 17) and also to the frequency response.
AUTO
SPEAKER SETUP
ADVANCED
DUAL AMP
BI-AMP
SPEAKERS
A B
AUTO DETECTOR
SURROUND
AUX SETUP MIC
MENU
SETU
P
RETURN
INPUT SELECTO
R
ENTER
VOLUME
HDMI
TUNE
S VIDEO IN
VIDEO IN
L
A
U
D
IO
IN
R
SA-XR58.indb 14 6/27/2006 6:54:58 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SA-XR58 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SA-XR58 in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SA-XR58

Panasonic SA-XR58 User Manual - German, French, Italian - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info