672291
60
Zoom out
Zoom in
Previous page
1/112
Next page
60
Condizione
Condizione
Causa
Causa
Sembra che dall’unità interna fuoriesca della
nebbia.
Effetto di condensa dovuto al processo di raffreddamento.
Rumore di acqua durante il funzionamento. Flusso del refrigerante all’interno dell’unità.
L’ambiente ha un odore particolare. Può essere dovuto a un odore di umido proveniente dai muri, ai tappeti,
dai mobili o dagli indumenti presenti nella stanza.
La ventola interna si arresta di tanto in tanto
quando si imposta la modalità di regolazione
automatica della velocità della ventola.
Ciò consente di eliminare gli odori circostanti.
L’operazione è ritardata di qualche minuto
dopo il riavvio.
Il ritardo è una protezione del compressore dell’apparecchio.
Dall’unità esterna fuoriesce acqua/vapore. Condensa o evaporazione nei condotti.
L’indicatore Timer rimane sempre acceso. L’impostazione Timer si ripete quotidianamente una volta impostata.
La ventola interna si arresta di tanto in tanto
quando si imposta la modalità riscaldamento.
Funzionalità studiata per evitare un effetto di raffreddamento non
intenzionale.
Durante questa fase potrebbero udirsi dei
crepitii.
I cambiamenti di temperatura causano l’espansione/contrazione
dell’unità.
L’unità passa in modalità FAN e l’aria diventa
umida.
Questo fenomeno si veri ca quando la temperatura della stanza
raggiunge quella impostata, il funzionamento passa alla modalità FAN e
l’umidità aumenta.
L’unità esterna emette rumore durante il
riscaldamento.
Questo fenomeno è dovuto ai cambiamenti di usso del gas refrigerante
quando il funzionamento si avvia o si arresta.
Il funzionamento non si arresta subito dopo
aver premuto il tasto OFF/ON.
È in corso lo scarico del calore. L’operazione si interrompe
automaticamente dopo circa 60 secondi.
Il funzionamento si arresta occasionalmente.
(“DEFROST” appare sul display del
telecomando)
L’unità è in modalità sbrinamento e la brina disciolta viene scaricata
dall’unità esterna.
Il usso d’aria non viene espulso subito dopo
aver avviato il funzionamento. (“PRE HEAT”
viene visualizzato sul display del telecomando)
L’unità si sta riscaldando per erogare aria calda.
Il funzionamento riprende con il ripristino della
corrente.
È in funzione il riavvio automatico, che riporta l’apparecchio
all’impostazione precedente.
Durante la modalità deumidi cazione, viene
espulsa aria fredda.
L’unità funziona in raffreddamento con una bassa velocità del ventilatore
per deumidi care la stanza.
La velocità del ventilatore cambia
occasionalmente durante la modalità
riscaldamento.
La temperatura della stanza ha raggiunto quella impostata sul
telecomando. Appena la temperatura diminuisce nuovamente, viene
ripristinata la velocità del ventilatore impostata sul telecomando.
L’unità esterna emette vapore durante la
modalità riscaldamento.
Questo fenomeno è dovuto allo sbrinamento che si veri ca nello
scambiatore di calore.
Le condizioni seguenti indicano un guasto.
Le condizioni seguenti indicano un guasto.
SOLUZIONE DEI PROBLEMI SOLUZIONE DEI PROBLEMI
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic S-56YA1E5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic S-56YA1E5 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info