594974
7
Zoom out
Zoom in
Previous page
1/28
Next page
7
7
ENGLISHESPAÑOL
RQTX1041
Cassette tape – Play and record
Basic play Basic play
Use normal position tapes.
High position and metal position tapes can be played, but the unit will not be
able to identify the characteristics of these tapes.
1 Press [TAPE/OFF].
2 Open the cassette operation buttons’ lid.
3 Press [8/x, STOP/EJECT] and insert the cassette.
Insert with the side to be played facing up and the exposed tape facing
towards you. Close the deck by hand.
4 Press [4, PLAY] to start play.
Stop tape
playback
Press [8/x, STOP/EJECT].
Pause play
Press [9, PAUSE].
Press again to resume play.
Fast-forward
and rewind
Press [3, REW/REV] or [5, FF/CUE] in the stop
mode.
Search for a
specifi c point
Press [3, REW/REV] (to search backward) or
[5, FF/CUE] (to search forward) during playback.
Play is resumed when the button is released.
Recording Recording
Use normal position tapes.
High position and metal position tapes can be used, but the unit will not be able
to record or erase them correctly.
Preparation
Wind up the source tape so recording can begin immediately.
1 Press [0, STOP/EJECT] and insert the cassette to be recorded.
Insert with the side to be recorded facing up and the exposed tape facing
towards you.
2 Select the source to be recorded.
RX-D55
USB
Prepare the USB mass storage device for recording
(Z page 6).
Radio
Tune in the station (Z page 6).
Disc
1. Insert the disc you want to record.
Press [4/9, CD] and then [8] (stop).
2. Prepare the desired disc recording mode.
Record programmed tracks
Program the tracks you want (Z page 5).
Record specifi c albums or tracks
Press [PLAY MODE] to select the desired mode
(Z page 5).
Music port
Select music port (Z page 8).
3 Press [
V
] to start recording.
Stop recording
Press [8/x, STOP/EJECT].
Record on the other
side of the tape
Turn the cassette over and press [
V
].
Erase a recorded
sound
1. Press [TAPE/OFF].
2. Insert the recorded cassette.
3. Press [
V
].
Note
Changes to volume and sound quality do not affect recording.
Erasure prevention
The illustration shows how to remove the tabs to prevent recording. To record on
the tape again, cover as shown.
Side A
Tab for Side ATab for Side B
To prevent recording
Adhesive tape
To re-record
Note
Tapes exceeding 100 minutes are thin and can break or get caught in the
mechanism.
Tape slack can get caught up in the mechanism and should be wound up
before the tape is played.
Endless tapes can get caught up in the deck’s moving parts if used incorrectly.
Using the clock and timers
Setting the clock Setting the clock
This is a 24-hour clock.
1 Press [CLOCK/TIMER].
Each time you press the button:
Original display
#
PLAY ON
CLOCK
2 Within 5 seconds or so
Press [2/3] or [5/6] to set the time.
Holding down the button will speed up the time selection.
3 Press [CLOCK/TIMER] to fi nish setting the time.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.
Note
Reset the clock regularly to maintain accuracy.
When the unit is in standby mode and it is powered by batteries, clock will not
be displayed.
Using the play timer Using the play timer
You can set the timer to come on at a certain time to wake you up.
Preparation
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio, USB (
RX-D55
only)
or music port source, and set the volume.
1 Press [CLOCK/TIMER] repeatedly to select the play timer.
2 Within 5 seconds or so
Press [2/3] or [5/6] to set the
starting time.
3 Press [CLOCK/TIMER] to confi rm.
4 Repeat steps 2 and 3 to set the fi nishing
time.
To activate the timer
5 Press [# PLAY] to turn on the timer.
# PLAY
No display (off)
6 Press [TAPE/OFF] to turn off the unit.
Change the
settings
Repeat steps 1 to 4 and 6 (Z see above).
Change the source
or volume
1. Press [# PLAY] to clear the timer indicator from the
display.
2. Make changes to the source or volume.
3. Perform steps 5 and 6 (Z see above).
Check the settings
(when the unit is on
or in standby mode)
Press [CLOCK/TIMER] repeatedly to select # PLAY
(there is no display when the unit is powered by
batteries and is in standby mode).
Cancel
Press [# PLAY] to clear the timer indicator from the
display.
Note
The play timer will start at the preset time, with the volume increasing
gradually to the preset level.
The timer comes on at the set time every day if the timer is on.
The unit must be in the standby mode for the timer to function.
If you turn the unit off and on again while a timer is functioning, the fi nish time
setting will not be activated.
Using the sleep timer Using the sleep timer
This function enables you to turn off the unit automatically after the set time
except in tape mode.
Press [SLEEP] repeatedly to select your desired time (in minutes).
To cancel
Press [SLEEP] repeatedly to select “OFF.
Changing the remaining time
Press [SLEEP] to show the remaining time, and press [SLEEP] again to select
your desired time.
Note
The play and sleep timer can be used together.
The sleep timer always has priority. Be sure not to overlap timer settings.
RQTX1041-2Z_1gb.indd 7RQTX1041-2Z_1gb.indd 7 4/8/2010 2:23:14 PM4/8/2010 2:23:14 PM
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic RX-D50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic RX-D50 in the language / languages: English, Polish, Spanish as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic RX-D50

Panasonic RX-D50 User Manual - German - 24 pages

Panasonic RX-D50 User Manual - Dutch, Danish - 24 pages

Panasonic RX-D50 User Manual - French, Italian - 24 pages

Panasonic RX-D50 User Manual - Swedish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info