Manual Panasonic RPBTD5E (page 5 of 132) (English, German, Dutch, Danish, French, Italian, Polish)

608266

Zoom out

Zoom in

1/132

SQT0818

ENGLISH

With Bluetooth

enabled phones (cell phones or smartphones) that support the

“HSP” or “HFP” Bluetooth

profile, you can use the unit for phone calls.

• HSP (Headset Profile):

This profile can be used to receive monaural sounds and establish two-way

communication using the microphone on the unit.

• HFP (Hands-Free Proﬁle):

In addition to the HSP functions, this profile has the incoming and outgoing calls

function.

Connect the Bluetooth

enabled phone and unit (→ P. 3)

When answering an incoming call

Press Call on the unit

and answer the call

• During an incoming call,

ringtone will sound from the

speaker and the LED will blink.

•(HFP only) To reject the

incoming call, press and hold

Call

until the ringtone stops.

Right

Call

When making an outgoing call

Make an outgoing call on

the Bluetooth

enabled

phone

• Also refer to the operating

manual for the Bluetooth

enabled phone.

(Checking and operation steps on the

unit are explained below)

• During an outgoing call, ringtone

will sound from the speaker and

the LED will blink.

• To cancel the outgoing call,

press Call

A beep will sound.

•(HFP only) When the phone is

idle, press and hold Call

for

approximately 5 seconds. An

outgoing call will be made to the

last dialed number. One short

click will sound from the speaker

and the LED will blink.

Start talking

• The LED will repeatedly blink 2 times during a call.

• The volume can be adjusted during a phone call. For setting instructions, see

page 4.

Press Call to end the phone call

• A beep will sound.

Making a phone call

■

Note

• There may be instances when hands free setting needs to be done on the

Bluetooth

enabled phone.

• Depending on the Bluetooth

enabled phone, you may hear incoming and

outgoing call ringtones of the phone from the unit.

•(HFP only) Press and hold the Call

on the unit for approximately 5 seconds.

The calling device will be switched between the Bluetooth

enabled phone and

the unit.

Useful functions

Resetting the unit

This unit can be reset when all operations are rejected. To reset the unit, connect

the unit to a computer using the USB charging cord. All the previous operations will

be cancelled. (The pairing device information will not be deleted.)

Auto power off

If the unit is silent for approximately 5 minutes and operations for Bluetooth

devices are idle during that period, a beep will sound and the power will be

automatically turned off.

LED indicator light

When the battery level is low during use of the unit, the blue blinking LED on the

right speaker will change to red*. A beep will sound every 1 minute. When the

battery runs out, the power will turn off.

* If you press and hold the pairing

button when the battery level is low, the LED

will blink only in red.

Restoring to the factory settings

When you want to delete all pairing device information, etc., you can restore the

unit to the factory settings (original settings upon purchase). Charge the battery

before restoring the unit.

1 Turn off the unit

2 Press and hold the power

button and Previous for 5 seconds or

more simultaneously

• The LED first blinks in blue, then lights in red. The unit will restore to the

factory settings.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic RPBTD5E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish as an attachment in your email.

The manual is 2,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Panasonic RPBTD5E Manual

Product: