511583
52
Zoom out
Zoom in
Previous page
1/98
Next page
Impostazione
52
- ITALIANO
Impostazioni
Cambia codice PIN logo
J
Il Codice PIN logo può essere cambiato inserendo il
proprio numero a quattro cifre desiderato.
Premere ▲▼ per selezionare [Cambia 1 )
codice PIN logo] e premere il tasto
<ENTER>.
Comparirà la nestra di dialogo Codice PIN
z
logo corrente.
Premere ▲▼ per inserire il codice 2 )
corrente, premere il tasto ► per ssare
il numero e spostare il puntatore della
cornice rossa alla casella successiva.
Comparirà la nestra di dialogo di inserimento
z
del Nuovo codice PIN logo.
Ripetere questa fase per impostare il 3 )
nuovo codice PIN logo.
Attenzione
Accertarsi di prendere nota del nuovo codice PIN logo e
z
tenerlo a portata di mano. Se si perde il numero, non si
potrà più cambiare l'impostazione del Codice PIN logo.
HDMI
Questa funzione si usa solo per la sorgente di
ingresso HDMI.
Premere ▲▼ per selezionare [HDMI].1 )
Premere ► o il tasto <ENTER>.2 )
I nomi per l'impostazione dell'uscita di Digital R/
z
G/B variano da un apparecchio all'altro.
Immagine
J
Normale
Per l'uscita di Digital R/G/B
l'apparecchiatura è impostata su
Predenito.
Avanzata
Per l'uscita di Digital R/G/B
l'apparecchiatura è impostata su
Avanzata.
Suono
J
HDMI
Quando la sorgente di ingresso è
digitale,
il suono è impostato su HDMI.
Computer 2
Quando la sorgente di ingresso
DVI viene cambiata in sorgente
di ingresso HDMI, il Suono viene
impostato su Computer 2.
Attenzione
Per i dettagli, consultare le istruzioni di funzionamento
z
dell'apparecchiatura R/G/B digitale.
Collegare i segnali di ingresso audio computer 2 al
z
terminale COMPUTER AUDIO IN 1 mentre la funzione
Suono è impostata su Computer 2 e la funzione MIC è
accesa.
Scheda conness.
Il terminale COMPUTER 2 IN/MONITOR OUT sul
retro del proiettore è commutabile per l'ingresso
computer 2 o l'uscita monitor.
Premere ▲▼ per selezionare [Scheda 1 )
conness.] e poi premere il tasto
<ENTER>.
Premere ▲▼ per commutare la voce.2 )
Computer 2 Ingresso Computer
Uscita monitor Uscita monitor
Nota
La funzione Scheda conness. non è diponibile quando
z
si seleziona [Computer 2] sulla sorgente di ingresso.
Cambiare la sorgente di ingresso in altre (HDMI,
Computer 1, Video o S-video) in modo che sarà
disponibile la funzione Scheda conness.
Risparmio energetico
Per ridurre il consumo energetico oltre che conservare
la durata della lampada, la funzione Risparmio
energetico spegne la lampada del proiettore quando
non viene utilizzato per un determinato periodo.
Premere ▲▼ per selezionare 1 )
[Risparmio energetico].
Premere ► oppure il tasto <ENTER> 2 )
per accedere al sottomenu.
Modalità
J
Premere ▲▼ e poi premere il tasto 1 )
<ENTER> per selezionare una modali
tra quelle indicate di seguito.
Pronto
Quando la lampada è completamente
raffreddata, la spia <ON(G)/
STANDBY(R)> diventa verde
lampeggiante. In questa condizione,
la lampada del proiettore si
accenderà se il segnale di ingresso
viene ricollegato o se si preme uno
qualsiasi dei tasti sul pannello di
controllo o sul telecomando.
Spegnere
Quando la lampada è completamente
raffreddata, l'alimentazione viene
disinserita.
Off
La funzione Risparmio energetico è
spenta.
Timer
J
Premere ▲▼ per selezionare [Timer] e 1 )
poi premere il tasto <ENTER>.
Premere ▲▼ per impostare il Timer 2 )
(1~30 min).
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-VX500E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-VX500E in the language / languages: Italian as an attachment in your email.

The manual is 13,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-VX500E

Panasonic PT-VX500E User Manual - English - 98 pages

Panasonic PT-VX500E User Manual - German - 98 pages

Panasonic PT-VX500E User Manual - French - 98 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info