536677
63
Zoom out
Zoom in
Previous page
1/115
Next page
[AUTO SETUP SETTING]
Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the
remote control or on the control panel on each occasion if you input unregistered signals frequently at meetings, etc.
Press 1) as to select [AUTO SETUP SETTING].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[AUTO] Enables the auto setup function when switching signals.
[BUTTON] Enables the auto setup function only when the <AUTO SETUP> button is pressed.
[SIGNAL SEARCH]
When the power is turned on, this function automatically detects the terminal which signals are input and sets the function to
switch.
Press 1) as to select [SIGNAL SEARCH].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[ON] Enables input detection automatically.
[OFF] Disables input detection automatically.
Note
If the [SIGNAL SEARCH] is set to [ON] when there is no signal input, press the <AUTO SETUP> button on the remote f
control or on the control panel, this function automatically detects the terminal to which signals are input and then switches.
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
Press 1) as to select [BACK COLOR].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[BLUE] Displays the entire projection area in blue.
[BLACK] Displays the entire projection area in black.
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO] Displays the image registered by the user.
Note
To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM. f
If you do not register the image of the [USER LOGO], the projected image will be displayed in black even if the [BACK f
COLOR] is set to [USER LOGO].
[WIDE MODE]
Using this function when displays the incorrect signals input.
Press 1) as to select [WIDE MODE].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[AUTO] Displays by judging the signal automatically. Set to this mode normally.
[OFF] When input the 4:3 signal.
[ON] When input the wide signal.
[SXGA MODE]
This function is used if the whole projected image is not displayed when SXGA signal is input. Set it to [SXGA] normally.
Press 1) as to select [SXGA MODE].
Press 2) qw to switch the item.
The items will switch each time you press the button. f
[SXGA] The image will be displayed completely when it is set to [SXGA].
[SXGA +] The image will be displayed incompletely when it is set to [SXGA +].
ENGLISH - 63
Chapter 4 Settings - [DISPLAY OPTION] menu
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-VX410Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-VX410Z in the language / languages: English as an attachment in your email.

The manual is 17,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info