511537
47
Zoom out
Zoom in
Previous page
1/127
Next page
Chapter 4 Settings — [PICTURE] menu
ENGLISH - 47
Note
f
When [PICTURE MODE] (
x
page 45) is set to [DYNAMIC], [COLOR TEMPERATURE] is xed to [USER]. (However, [WHITE BALANCE
HIGH] cannot be adjusted.)
f
When [COLOR MATCHING] (
x
page 58) adjustment is set to other than [OFF], [COLOR TEMPERATURE] is xed to [USER].
Adjusting desired white balance
1)
Press as to select [COLOR TEMPERATURE].
2)
Press qw or the <ENTER> button.
f
The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3)
Press qw to select [USER].
4)
Press the <ENTER> button.
f
The [COLOR TEMPERATURE] screen is displayed.
5)
Press as to select [WHITE BALANCE].
6)
Press the <ENTER> button.
f
The [WHITE BALANCE] screen is displayed.
7)
Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].
8)
Press the <ENTER> button.
f
The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.
9)
Press as to select [RED], [GREEN], or [BLUE].
10)
Press qw to adjust the level.
Item Operation Adjustment Range
[RED]
Press the
w
button. Deepens red.
[WHITE BALANCE HIGH]: 0 - 255 (factory default is 255)
[WHITE BALANCE LOW]: -127 - 127 (factory default is 0)
Press the
q
button. Weakens red.
[GREEN]
Press the
w
button. Deepens green.
Press the
q
button. Weakens green.
[BLUE]
Press the
w
button. Deepens blue.
Press the
q
button. Weakens blue.
Note
f
Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment
does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the
factory default setting.
f
The setting of [COLOR TEMPERATURE] is not reected in internal test patterns (
x
page 81). Make sure to set [COLOR TEMPERATURE]
while projecting input signal.
Changing the [USER] name
1)
Press as to select [COLOR TEMPERATURE].
2)
Press qw or the <ENTER> button.
f
The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3)
Press qw to select [USER].
4)
Press the <ENTER> button.
f
The [COLOR TEMPERATURE] screen is displayed.
5)
Press as to select [COLOR TEMPERATURE NAME CHANGE].
6)
Press the <ENTER> button.
f
The [COLOR TEMPERATURE NAME CHANGE] screen is displayed.
7)
Press asqw to select the text, and press the <ENTER> button to enter the text.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-RZ370E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-RZ370E in the language / languages: English as an attachment in your email.

The manual is 15,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-RZ370E

Panasonic PT-RZ370E Additional guide - German - 11 pages

Panasonic PT-RZ370E User Manual - German - 130 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info