537859
39
Zoom out
Zoom in
Previous page
1/59
Next page
Settings
ENGLISH
39
Menu operation (continued)
NO SIGNAL SHUT-OFF
If no image signal is input for the time set using the
timer, the projector will automatically enter into standby
mode.
Change setting
Change
setting
Change
setting
Change setting
DISABLE NO SIGNAL SHUT-OFF is disabled
15 – 60
MIN.
Timer can be set at a 5-minute intervals
INITIAL START UP
You can set the starting method when the power plug is
connected to wall outlet.
Change setting
Change
setting
Change
setting
Change setting
LAST
MEMORY
Projector starts from the last image
before the power plug was disconnected
STANDBY Projector starts in the standby mode
ON Projector starts immediately
INSTALLATION
When installing the projector, select the projection
method according to the projectors position.
(
page 17)
Change setting
Change
setting
Change
setting
Change setting
HIGH ALTITUDE MODE
If you use the projector at high elevation, the HIGH
ALTITUDE MODE setting need to be ON to set the fan
speed to high.
Change setting
Change
setting
Change
setting
Change setting
OFF
Use in normal environment
(below 1 400 m (4 593 ft) above sea
level)
ON
Use at high altitude
(at 1 400 m – 2 700 m (4 593 - 8 858 ft)
above sea level)
NOTE:
The loudness of fan noise depends on the • HIGH
ALTITUDE MODE setting.
STANDBY MODE
You can change the standby mode setting.
Change setting
Change
setting
Change
setting
Change setting
ECO
The standby power is reduced to 0.4 W
to save power
NORMAL
The power of the projector can be
turned ON and the audio output can be
set active by controlling the computer
connected via wired LAN in standby
mode
LAMP POWER
You can adjust the power of the lamp to save electricity
and reduce the noise.
Change setting
Change
setting
Change
setting
Change setting
NORMAL When higher luminance is required
ECO Whenlowerluminanceissufcient
NOTE:
This function is disabled when no input signal is detected.•
ECO• setting is recommended when higher luminance is not
required such as in a small room.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-LB3E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-LB3E in the language / languages: English as an attachment in your email.

The manual is 9,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info