537859
33
Zoom out
Zoom in
Previous page
1/59
Next page
Settings
ENGLISH
33
Menu operation (continued)
CLOCK PHASE
If you require further adjustment for the same reason as
the DOT CLOCK adjustment, you can further adjust the
timing of the clock. (For RGB/YP
B
P
R
input signal only)
Press◄►buttonstoadjust.
NOTE:
Iftheprojectingsignal’sdotclockfrequencyishigherthan•
162 MHz, adjusting DOT CLOCK or CLOCK PHASE may
not make any difference. Refer to “LIST OF COMPATIBLE
SIGNALS”. (
page 52)
OVER SCAN
Use this function when characters or pictures are
cropped near the periphery of the projected image.
(For S-VIDEO/VIDEO/RGB (Moving image)/YP
B
P
R
input signal only)
Zoom out
Change
setting
Change
setting
Zoom in
Setting range: 0 to +3
ASPECT
You can manually switch to the desired aspect ratio.
Selectable options vary according to input signal.
Change setting
Change
setting
Change
setting
Change setting
AUTO 4:3 16:9
THROUGH H FIT
S4:3 HV FIT V FIT
NOTE:
AUTO• mode is displayed only when NTSC/480i signal is
input.
THROUGH• mode is displayed only for certain signals.
For the wide signal*•
2
, the aspect ratio option cycles through
16:9↔VFIT↔HVFIT.
AUTO (For NTSC/480i input signal only)
The signal which contains an identifying signal will be
detected and will automatically project the image in the
most optimal aspect setting.
4:3
Standard input signal*
1
projection is 4:3 aspect ratio.
Input signal: XGA
Image:
16:9
Standard input signal*
1
projection is 16:9 aspect
ratio.
Wide input signal*
2
projection is the current aspect
ratio.
Input signal: 1 080/60i
Image: Panel:
H FIT
Standard input signal*
1
projection without changing
the aspect ratio uses all the panel pixels in the
horizontal direction to crop the top and bottom of the
image.
Input signal: SXGA
Image:
*
1
A standard signal has an aspect ratio of 4:3 or
5:4.
*
2
A wide signal has an aspect ratio of 16:10, 16:9 or
15:9.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-LB3E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-LB3E in the language / languages: English as an attachment in your email.

The manual is 9,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info