543463

Panasonic PT-FX400EA Manual

14
Zoom out
Zoom in
Previous page
1/46
Next page
14
When setting [OPEN] or [SHARED] as authentication and setting [WEP] as the
encryption method:
DEFAULTKEY : Set 1 – 4 numerals for the default key.
KEY1–4 : SetaWEPkeytothekeynumberselectedwith[DEFAULTKEY].
Eitherthe64-bitor128-bitWEPkeycanbeset.Forthe64-bitkey,
inputvealphanumerics(ora10-digitstringforthehexadecimalformat)
forthe128-bitkey,input13alphanumerics(ora26-digitstringforthe
hexadecimalformat).
When using [WPA-PSK] or [WPA2-PSK] :
Set a key.
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal
format.
When the authentication method is [WPA-EAP/WPA2-EAP], [WPA-EAP], [WPA2-EAP]:
Set[EAP],[USERNAME],and[PASSWORD].
EAP
1
: SelecttheEAPsetupintheRADIUSserver
1
. Types of
EAP that can be selected are as follows.
PEAP
1
(MS-CHAPv2
1
),PEAP
1
(GTC
1
),
EAP-TTLS
1
(MD5
1
),EAP-TTLS
1
(MS-CHAPv2
1
),
EAP-FAST
1
(MS-CHAPv2
1
),EAP-FAST
1
(GTC
1
),
EAP-TLS
1,2
USERNAME: Input a user name used for authentication (excluding
spaces)(maximum64characters).
PASSWORD: Input a password used for authentication (maximum 64
characters).
1:“Glossary”( See page 44–45)
2:When[EAP-TLS]isselectedasEAP,itisrequiredtosetup“USERNAME”,“PASSWORD”,“DIGITAL
CERTIFICATE”,and“CACERTIFICATE”withtheWEBbrowser.(See page30–31)
IfyouareunabletoconnecttothewirelessLANthroughtheaccesspointevenafterperformingthesteps•
in “Projector settings (See page 22)”,contactthemanufactureroftheaccesspoint.
WhenusingEAP,theprojectorneedstobesetaccordingtothesettingoftheRADIUSserver.Checkwith
•
thenetworkadministratorforthesettingoftheRADIUSserver.
WhenusinganEAPtogetherwithanaccesspointwithinvalidSSIDbroadcast,selectWAP-EAPor
•
WAP2-EAPfortheauthenticationmethodeveniftheauthenticationmethodoftheaccesspointisWPA-
EAP/WPA2-EAP.
Default settings of [USER1] - [USER3]
Thefollowingsettingsas[USER1]-[USER3]inthewirelessLANaresetbeforetheprojectorleavesthe
factory.
SSID Panasonic Projector
DHCP OFF
IPADDRESS 192.168 .11.100
SUBNETMASK 255.255.255.0
DEFAULTGATEWAY 192.168 .11.1
MODE ADHOC
AUTHENTICATION OPEN
ENCRYPTION NONE
CHANNEL 11
NETWORK menu (continued)
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-FX400EA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-FX400EA in the language / languages: English as an attachment in your email.

The manual is 11,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info