511544
65
Zoom out
Zoom in
Previous page
1/118
Next page
Setting
ENGLISH -
65
Settings
HDMI setup
This function is only used for HDMI input source.
Press ▲▼ to select [HDMI setup].1 )
Press ► or the <ENTER> button.2 )
The names for the output setting of Digital R/G/
z
B vary from equipment to equipment.
HDMI signal level
J
64-940
When the output of Digital R/G/B
equipment is set to Standard.
0-1023
When the output of Digital R/G/B
equipment is set to Enhanced.
Sound
J
HDMI
When Digital input source is input,
Sound is set to HDMI.
AUDIO 1
When DVI input source is changed
to HDMI input source, Sound is set
to
AUDIO 1
.
Note
For details, refer to the operating instructions of your
z
Digital R/G/B equipment.
DVI signal level
This function is only used for DVI-D input source.
Press ▲▼ to select [DVI signal level] 1 )
and then press the <ENTER> button.
Press ▲▼ to switch the item.2 )
16-235
When you want to enhance
the weaken signal.
0-255:PC
When in normal condition.
Lamp power
This function allows you to change brightness of the
screen.
Press ▲▼ to select [Lamp power] and 1 )
then press the <ENTER> button .
Press ▲▼ to select one among the 2 )
modes as below.
Auto
Brightness according to the input
signal.
Normal
The lamp power output is
maximum.
Eco1
The lamp power output is 80%
of the Normal mode.
Eco2
The lamp power output is 30% -
80% of the Normal mode.
Fan control
Press ▲▼ to select [Fan control] and 1 )
then Press <ENTER> button.
Press ▲▼ to select one among 2 )
options as below.
Choose the running speed of cooling fans from
z
the following options according to the ground
elevation under which you use the projector.
Off
Normal speed.*
1
On 1
Faster than [Off] mode.*
2
On 2
Faster than [On 1] mode.*
3
Set this function to [Off] when using the projector *1 :
in non-high altitude environment.
Select [On 1] when using the projector in high *2 :
altitudes (about 1 000 m ~ 2 000 m or more
above the sea level) where the fans have less
cooling effect.
Select [On 2] when using the projector in higher *3 :
altitudes (about 2 000 m ~ 2 700 m or more
above the sea level) where the fans have lesser
cooling effect.
Note
Failure to set the running speed of cooling fans
z
properly may affect the projector life.
The fan noise becomes louder in [On 1] and [On 2].
z
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-EZ570EL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-EZ570EL in the language / languages: English as an attachment in your email.

The manual is 16,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-EZ570EL

Panasonic PT-EZ570EL User Manual - German - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info