511543
89
Zoom out
Zoom in
Previous page
1/118
Next page
ENGLISH -
89
Maintenance
About indicator status
If an indicator turns on
If a problem occurs within the projector, it will be notied with the temperature indicator <TEMP>, the lter
indicator <FILTER>, the shutter indicator <SHUTTER*/AV MUTE*>, and the lamp indicator <LAMP>.
Check the status of the indicators and take the following action.
*<SHUTTER> indicator (Only for EZ570 series, EW630 series and EX600 series.)
<AV MUTE> indicator (Only for EW530 series and EX500 series.)
CAUTION
Before you take a remedial measure, follow the procedure of switching the power off indicated in “Turning off the projector”.
z
(
Æ
page 39)
If multiple indicators light or blink, verify the status of the projector by looking at each indicator.
z
Note
Conrm the status of the power indicated on the <ON(G)/STANDBY(R)> indicator.
z
When operating correctly
J
The status of the indicator is displayed with the following symbols.
: Off, : On,
: Flashing, : Off or On or Flashing
Indicators
Status of the projector
<ON(G)/
STANDBY(R)>
Green/Red/
Orange
<TEMP>
Red
<FILTER>
Orange
<SHUTTER/
AV MUTE>
Blue
<LAMP>
Orange
//
The power plug has been removed from the
outlet.
//
*
1
*
1
*
1
*
1
The projector is in the standby mode.
Turns on when pressing the <POWER ON>
button on the remote control or the < >
button on the side control.
//
*
1
*
1
*
1
*
1
The projector is operating normally.
//
*
2
*
1
*
1
*
1
*
1
The lamp is cooling down. The projector does
not turn on when pressing the <POWER ON>
button on the remote control or the < >
button
on the side control until the standby indicator
<ON(G)/STANDBY(R)> changes to red.
*
2
//
*
1
*
1
*
1
*
1
The projector is in the power management
mode. The lamp will turn on when controlling the
projector, allowing the user to start operating it.
//
*
2
*
1
*
1
*
1
*
1
Power management mode is [On] and the lamp
is cooling down.
//
*
1
*
1
*
1
The shutter function has been turned on.
Press any button on the remote control or the
side control to cancel the function.
//
*
1
*
1
*
2
*
1
The projector is in the shutter management
mode. The lamp will turn on when controlling the
projector, allowing the user to start operating it.
//
*
2
*
1
*
1
*
2
*
1
Shutter management mode is [On] and the lamp
is cooling down.
*1: The indicator will change according to different conditions, regardless of the status of other indicators.
*2: The indicator will ash in approximately 1-second intervals.
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-EX500E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-EX500E in the language / languages: English as an attachment in your email.

The manual is 16,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-EX500E

Panasonic PT-EX500E User Manual - German - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info