511543
64
Zoom out
Zoom in
Previous page
1/118
Next page
Setting
64
- ENGLISH
Settings
Attention
Be sure to note the new Logo PIN code and keep it on
z
hand. If you lost the number, you could no longer change
the Logo PIN code setting.
Picture in Picture
This function is used to project two images
simultaneously by placing a separate small sub
screen within or next to the main screen.
Press ▲▼ to select [Picture in 1 )
Picture
*
].
You can also press the <P IN P>button on
z
the remote control for more than 3 seconds to
display [Picture in Picture] menu.
Press the <ENTER> button to access 2 )
the submenu.
Only the sound from the source of Main picture
z
is valid, while the source of Sub picture cannot
output the sound.
* (Only for EZ570 series, EW630 series and EW530
series.)
User setting
J
Show the selected mode ([Off/User 1-5]) and its status
([Stored /Free/ Adj.]). [User 1] and [User 2] have
stored default values.
P in P/P by P
J
P IN P
Provide the images of Main picture
and Sub picture at the ratio of
Screen aspect in the Screen Menu.
P by P
Provide the images of Main picture
and Sub picture at the ratio of 4:3.
Note
In [P in P] the larger picture is main picture, and the
z
smaller one is sub picture; in [P by P], the left picture is
main picture, and the right one is sub picture.
Main picture/ Sub picture
J
Press ▲▼◄► to adjust the display 1 )
position of active frame indicated in
white.
The frame will disappear after 10 seconds or
z
when the <ENTER> button is pressed.
Input
Select an input from Input 1-3.
Source
Select an input source.
Size
Select the display size.
Position
Press the <ENTER> button at
Position and the display position
setting screen appears.
Selecting the Main picture or the Sub picture
z
During Picture in Picture mode, and being
undisplayed On Screen Menu, press the <ENTER>
button to select Main or Sub picture. (A red frame
will be displayed on the selected picture.)
Switching Input and Source
z
When selecting Main picture or Sub picture, input
and source can be set by pressing the <INPUT>
button on the side control or INPUT 1/2/3 button
on the remote control. Operation on the On Screen
Menu is not necessary.
Frame lock
J
Set the Frame Lock to Main picture or Sub picture.
Reset
J
Press the <ENTER> button at [Reset] to display a
conrmation box. To reset, press the <ENTER> button
at [Yes].
Mode free
J
Delete the data stored in the Mode and return to [Free].
Use the ▲▼ buttons to select [Mode free] and press
the <ENTER> button to show the [Where to free?]
dialog box. Move the highlight to one of the mode
([User 1 - 5]) which you want to delete and press the
<ENTER> button. Then the conrmation box appears.
To delete, select [Yes].
Store
J
Store the adjusted data in the [User 1-5]. Use the
▲▼ buttons to select [Store] and press the <ENTER>
button to show the [Where to store?] dialog box. Move
the highlight to one of the mode (User 1 - 5) which
you want to store and press the <ENTER> button.
Then the conrmation box appears. To store adjusted
data, select [Yes].
Note
The [Picture in Picture] function is not available
z
depending on the input signals and the selected input
terminals.
When the input signal(s) is/are incompatible,
z
X
mark will
be displayed on the Main/Sub picture.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-EX500E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-EX500E in the language / languages: English as an attachment in your email.

The manual is 16,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-EX500E

Panasonic PT-EX500E User Manual - German - 118 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info