543734
73
Zoom out
Zoom in
Previous page
1/108
Next page
[Setting] menu
ENGLISH - 73
Settings
[Filter counter reset]
Resets the value of [Filter counter].
After replacing the lter, be sure to reset the
counter.
1) Select [Filter counter reset], and press
the <SELECT> button.
z
A screen for conrming whether to reset is
displayed.
2) Select [Yes], and press the <SELECT>
button.
z
The conrmation screen is displayed.
3) Select [Yes], and press the <SELECT>
button.
Note
z
Reset only after replacing the lter.
z
When reset, the display of [Filter warning]
disappears.
[P-timer]
1) Press
▲▼
to select [P-timer].
2) Press the <SELECT> button.
z
The sub menu 2 is displayed.
3) Press
▲▼
to select an item.
[Count up]
Elapsed time is counted from 00 min 00 sec.
Elapsed time from 00 min 00 sec to 180 min
00 sec is displayed.
[Count down]
Elapsed time is counted down from the set time.
Set the time using [Timer].
[Timer]
Sets the [Count down] time.
1) Select [Timer], and press the
<SELECT> button.
z
▲▼
are displayed over the sub menu 2.
2) Press
▲▼
to select an item.
Note
z
The factory default setting is “10 minutes”.
z
When [Count up] is selected, this item is grayed out
and cannot be selected.
[Start]
Starts the count-up or countdown.
1) Select [Start], and press the <SELECT>
button.
z
The menu screen is cleared and the timer is
displayed.
[Stop]
Pauses the count-up or countdown.
1) Select [Stop], and press the <SELECT>
button.
z
The stopped state of the timer is displayed for
approximately three seconds, then the display
returns to the menu screen.
[Restart]
Restarts the count up or countdown that was
paused using [Stop].
1) Select [Restart], and press the
<SELECT> button.
z
The menu screen is cleared and the timer is
displayed.
[Reset]
Resets the counted time during operation.
1) Select [Reset], and press the
<SELECT> button.
z
The count up is returned to “000:00” and the
countdown is returned to the time set on the
timer.
[Exit]
Exits the presentation timer during operation.
1) Select [Exit], and press the <SELECT>
button.
z
The timer ends, and the screen display returns
to the sub menu.
Note
z
You can also use [P-timer] by pressing the
<P-TIMER> button on the remote control.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-EX16KU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-EX16KU in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-EX16KU

Panasonic PT-EX16KU Installation Guide - English - 27 pages

Panasonic PT-EX16KU User Manual - German - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info