543734
68
Zoom out
Zoom in
Previous page
1/108
Next page
[Setting] menu
68 - ENGLISH
Settings
[Power management]
1) Press
▲▼
to select [Power
management].
2) Press the <SELECT> button.
z
The sub menu 2 is displayed.
3) Press
▲▼
to switch the setting.
[Off]
Cancels power management
function.
[Ready]
Turns off the lamps and starts
cooling when the time set using
[Timer] has elapsed. While lamp is
being cooled, the standby indicator
<STAND-BY>, and the power
indicator <POWER> are ashing,
you cannot operate the projector.
When lamp cooling has nished,
the power indicator <POWER>
continues ashing and the standby
indicator <STAND-BY> lights up
instead of ashing, indicating that
the projector is now in the power
management mode.
From this point, if a signal is input
or operations are performed on the
projector, the lamps will turn on and
the projection will start.
[Shut down]
Turns off the lamps and starts
cooling when the time set using
[Timer] has elapsed. During lamp
cooling, you cannot operate the
projector.
When lamp cooling has nished,
the power will turn off.
[Timer] Sets times from 1 - 30 minutes.
Note
z
The factory default setting is [Off].
z
The power management function cannot be used
when the freeze function (
page 37) or shutter
function (
page 37) is in use.
z
When the power management function is started,
[P-timer] is reset.
[Direct on]
This is a function for automatically switching on
the power of the projector when the power cord is
connected, without requiring operations on the power
<ON> button on the remote control or the power <ON/
STAND-BY> button on the control panel.
1) Press
▲▼
to select [Direct on].
2) Press the <SELECT> button.
z
▲▼
are displayed over the sub menu 2.
3) Press
▲▼
to switch the setting.
[Off] [On]
[Off]
Enables normal operations to turn
on/off the power.
[On]
Allows power to be turned on
directly.
Note
z
Be sure to turn on/off the power using the correct
operations.
z
Pressing the power <ON> button on the remote
control or the power <ON/STAND-BY> button on
the projector will not turn on the power until the
lamp cooling has nished and the lamps are ready
to be turned on again.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-EX16KU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-EX16KU in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-EX16KU

Panasonic PT-EX16KU Installation Guide - English - 27 pages

Panasonic PT-EX16KU User Manual - German - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info