543734

Panasonic PT-EX16KU Manual

60
Zoom out
Zoom in
Previous page
1/108
Next page
[Setting] menu
60 - ENGLISH
Settings
[Background]
Selects the background screen when there is no input
signal.
1) Press
▲▼
to select [Background].
2) Press the <SELECT> button.
■
z
▲▼
are displayed over the sub menu 2.
3) Press
▲▼
to select an item.
■
z
The setting will change as follows each time
you press the button.
[Blue] [User]
*1
[Black]
*1: Available when the image is registered.
■
z
[User] displays the image registered by the user.
■
z
“Logo Transfer Software” is required to register
the image.
[Lamp select]
Selects the lamp used for projection.
1) Press
▲▼
to select [Lamp select].
2) Press the <SELECT> button or
▶
.
■
z
The sub menu 2 is displayed.
3) Press
▲▼
to select.
■
z
Press
◀
to return to the sub menu.
■■
[4-Lamps]
Turns on four lamps.
1) Select [4-Lamps], and press the
<SELECT> button.
2) Select [Yes], and press the <SELECT>
button.
■
z
The setting ends and the projector returns to
the sub menu 2 screen.
■
z
Select [No] and press the <SELECT> button to
return to the sub menu 2.
■■
[2-Lamps]
Turns on two lamps.
1) Select [2-Lamps], and press the
<SELECT> button.
2) Select [Yes], and press the <SELECT>
button.
■
z
The setting ends and the projector returns to
the sub menu 2 screen.
■
z
Select [No] and press the <SELECT> button to
return to the sub menu 2.
[Auto]
Automatically detects the lamp with
the shortest total time, and prioritizes
to turn it on.
Turns on lamp 2 and lamp 3.
Turns on lamp 1 and lamp 4.
Note
z
If a lamp fails as a result of a fault or reaching the
end of its service life, the lamp indicator <LAMP
REPLACE> on the front of the projector body and
the lamp indicator (<LAMP 1 REPLACE> - <LAMP
4 REPLACE>) on the projector body above the
failed lamp will ash. An X mark will also appear as
the lamp status at the top of the screen.
z
When [4-Lamps] is selected and one lamp fails, two
diagonally opposed lamps (not including the failed
lamp) perform the projection.
If a further lamp fails, the projection will continue
with one lamp.
z
When [2-Lamps] is selected and one lamp fails, two
diagonally opposed lamps (not including the failed
lamp) perform the projection.
If a further lamp fails, the projection will continue
with one lamp.
z
If all the lamps fail, the power will switch off. If the
power is turned on without replacing the lamps
after the duration exceeds 2 200 hours of usage
for all lamps, the power automatically turns off
after approximately ten minutes to prevent the
malfunction of the projector.
[Lamp power]
Sets switching of lamp brightness.
Using the eco mode is recommended if you want to
reduce power consumption.
1) Press
▲▼
to select [Lamp power].
2) Press the <SELECT> button.
3) Press
▲▼
to select an item.
■
z
The setting will change as follows each time
you press the button.
(Auto)
Sets the brightness automatically
using a light-metering circuit.
(Standard)
Operates in certain brightness.
(Eco mode 1)
The air intake/exhaust decreases
compared to
, and the sound of
the fan becomes lower.
(Eco mode 2)
The air intake/exhaust increases
in comparison to , and the fan
becomes louder.
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-EX16KU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-EX16KU in the language / languages: English as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-EX16KU

Panasonic PT-EX16KU Installation Guide - English - 27 pages

Panasonic PT-EX16KU User Manual - German - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info