511529
96
Zoom out
Zoom in
Previous page
1/119
Next page
Maintenance/replacement
96 - ENGLISH
Maintenance
Lamp unit
The lamp unit is a consumable component. Check the lamp usage duration with “[Information] menu”
(
page 85) and perform regular replacement.
If the replacement message
is displayed on the screen and the lamp indicators <LAMP 1
REPLACE>/<LAMP 2 REPLACE> turn on, replace the lamp units.
It is recommended that you request a qualied technician to replace the lamp unit. Consult your dealer.
Consult your dealer to purchase the part ET-LAE12 (serviceable part).
Attention
z
Do not replace the lamp unit until it has cooled down sufciently. (Wait at least 60 minutes after use.)
The inside of the cover is very hot and may cause burns.
Notes on the replacement of the lamp unit
z
Since the luminous lamp is made of glass, it may burst if dropped or hit with a hard object. Please handle
with care.
z
A Phillips screwdriver is necessary when replacing the lamp unit.
z
When replacing the lamp unit, be sure to hold it by the handle.
z
The lamp contains mercury. When disposing of the used lamp unit, ask your nearest local authorities or
dealer about proper disposal of the unit.
Attention
z
Use only specied lamp units.
z
The product numbers of accessories and separately sold components are subject to change without notice.
z
Replacement of all two lamps simultaneously is recommended to ensure a balanced brightness and tint.
When to replace the lamp unit
The lamp unit is a consumable component. Replace the lamp unit regularly, as its brightness gradually
decreases over time. The estimated duration before replacement is 2 000 hours (when [Lamp power] is set to
standard). However, this may shorten depending on individual lamp characteristics, usage conditions, and the
installation environment. Earlier replacement of lamp units is recommended for this reason.
The duration exceeds 2 200 hours of usage for one lamp, the lamp will be switched to the other one if it is
available.
If the power is turned on without replacing the lamps after the duration exceeds 2 200 hours of usage for all
lamps, the power automatically turns off after approximately ten minutes to prevent the malfunction of the
projector.
On-screen display Lamp indicator <LAMP 1 REPLACE>/<LAMP 2
REPLACE>
The lamp replacement instructions notify the
replacement time, and the lamp status noties which
lamp to replace.
Turns orange.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-EX12K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-EX12K in the language / languages: English as an attachment in your email.

The manual is 7,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-EX12K

Panasonic PT-EX12K User Manual - German - 117 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info