511529
91
Zoom out
Zoom in
Previous page
1/119
Next page
About indicator status
ENGLISH - 91
Maintenance
When there is a problem with the lamp
The status of the indicator is displayed with the following symbols.
s
: Off,
: On,
H
: Flashing,
: On or Flashing
Indicator
Status of the projector
<POWER>
Green
<STANDBY>
Red
<WARNING
TEMP.>
Red
<WARNING
FILTER>
Orange
<SHUTTER>
Blue
<LAMP 1
REPLACE>/
<LAMP 2
REPLACE>
Orange
*1
*1
*1
*1
*1
H
*2
Either or both of the lamps do not turn on. (If both
of the lamps fail, they are cooling down. After the
standby indicator <STANDBY> turns on again, press
the power <POWER ON> button on the remote control
or the power button on the control panel.)
*1
*1
*1
*1
*1
The recommended time to replace the lamp has been
reached.
The
will be displayed at the top right of the screen
to notify the user of replacement.
Replace the lamp unit as soon as possible. Replacing
the lamp will cause the lamp indicator <LAMP 1
REPLACE>/<LAMP 2 REPLACE> to turn off.
*1: The indicator will turn on or ash under certain conditions, regardless of the status of other indicators.
*2: The indicator will ash in approximately 1-second intervals.
Note
z
The status of each lamp can be checked as the lamp indicators <LAMP 1 REPLACE>/<LAMP 2 REPLACE>
on the front of the projector turn on or ash. (
page 96)
When there is a problem with the shutter
The status of the indicator is displayed with the following symbols.
s
: Off,
: On,
H
: Flashing,
: On or Flashing
Indicator
Status of the projector
<POWER>
Green
<STANDBY>
Red
<WARNING
TEMP.>
Red
<WARNING
FILTER>
Orange
<SHUTTER>
Blue
<LAMP 1
REPLACE>/
<LAMP 2
REPLACE>
Orange
*1
*1
*1
*1
H
*2
*1
The shutter cannot be opened or closed. The lamp will
turn off, cooling will begin and the projector will switch
to the standby mode. The power will turn on and the
projector will attempt to open the shutter automatically
up to three times. After three failed attempts, the
projector will switch to the standby mode after the
lamp has cooled.
s H
*3
s s H
*2
*1
There is a problem with opening or closing the shutter,
and the lamp has turned off and is cooling down.
s s
*1
H
*2
*1
There is a problem with opening or closing the shutter,
and projector will switch to the standby mode after the
lamp has turned off and cooled down.
*1: The indicator will turn on or ash under certain conditions, regardless of the status of other indicators.
*2: The indicator will ash in approximately 0.5-second intervals.
*3: The indicator will ash in approximately 1-second intervals.
Note
z
The status of each lamp can be checked as the lamp indicators <LAMP 1 REPLACE>/<LAMP 2 REPLACE>
on the front of the projector turn on or ash. (
page 96)
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-EX12K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-EX12K in the language / languages: English as an attachment in your email.

The manual is 7,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-EX12K

Panasonic PT-EX12K User Manual - German - 117 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info