543623
80
Zoom out
Zoom in
Previous page
1/95
Next page
80
- ENGLISH
Maintenance
Troubleshooting
Should any problem persist, contact your dealer.
Problem Cause
Reference
page
Power does not turn
on.
The power cord may not be connected.
z
The <MAIN POWER> switch is turned off.
z
33
No electric supply is at the wall outlet.
z
The circuit breakers have tripped.
z
[LAMP indicator] or [TEMP indicator]is lit or ashes.
z
75, 76
The lamp unit cover has not been securely installed.
z
78
No picture appears.
The video signal input source may not be connected to a terminal
z
properly.
28
The input selection setting may not be correct.
z
36
The [BRIGHTNESS] adjustment setting may be at the minimum setting.
z
43
The input source which is connected to the projector may have a
z
problem.
The [AV MUTE] function may be in use.
z
36
If the [Power indicator] ashes in red, consult your dealer.
z
The picture is fuzzy.
The lens focus may not have been set correctly.
z
34
The projector may not be at the correct distance from the screen.
z
23
The lens may be dirty.
z
15
The projector may be tilted too much.
z
The color is pale or
grayish.
[COLOR] or [TINT] adjustment may be incorrect.
z
43
The input source which is connected to the projector may not be
z
adjusted correctly.
RGB cable is damaged.
z
The remote control
does not operate.
The batteries may be weak.
z
The batteries may not have been inserted correctly.
z
18
The remote control signal receptor on the projector may be obstructed.
z
18
The remote control unit may be out of the operation range.
z
18
Strong light such as uorescent shine onto the signal receptor.
z
18
[REMOTE CONTROLLER] of [CONTROL DEVICE SETUP] in
z
SECURITY menu is [DISABLE].
74
Is the remote (REMOTE IN) terminal used for external control?
z
85
The remote control ID setting is incorrect.
z
21, 62
On screen menu
does not appear.
ON SCREEN button on the remote control may have been pressed and
z
cleared.
39
The control buttons
of the projector do
not operate.
[CONTROL PANEL] of [CONTROL DEVICE SETUP] in SECURITY
z
menu is [DISABLE].
74
Is the remote (REMOTE IN) terminal used for external control?
z
85
The picture does not
display correctly.
[SYSTEM SELECTOR] may not have been set correctly.
z
46
There may be a problem with the VCR or other signal source.
z
A signal which is not compatible with the projector is being input.
z
87
80


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic PT-DZ570U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic PT-DZ570U in the language / languages: English as an attachment in your email.

The manual is 10,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic PT-DZ570U

Panasonic PT-DZ570U Installation Guide - English - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info